So I've been playing around with the $12P (Ver 111) that works with the chip I have. I've been trying to set it up EXACTLY the same as the ATFY factory chip I have, as that worked quite well, But I reckon theres room for improvement. Ive copied across the spark and fuel maps, and filled in the extra...

Hi, I managed to connect to the ECU after the third attempt at making an ALDL connector cable. Using the flashtool by VL400 (OSE Enhanced Flash tool) I could see that it was already using 12P ver 111. Armed with this info, I was able to download the bin to my PC and open it in TunerPro. MY VRECU BIN...

Couple of pics showing the ROM/RAM setup, and the write enable wire, I believe.

Hi, Been away for a while, but still trying to learn. Today I lucked in (I think!) at the local pick a part, and scored a VR V6 Manual ECU. The 1613082. Only set me back $44. When I popped it open, I was surpised to find that it had, instead of the usual chip, A DALLAS DS1230Y-100+ NVRam in it. Also...

Ok, Cheers for that, So if I edit the F29H VE table, Do I increase the numbers for richer? Or decrease them? Or, is the 808 able to interface with a wide band O2 sensor? Would it then be able to 'read' the differing voltage, and then attempt trim the fuel ratio to match the F60 fuel table? Or is tha...

Hi, cheers for the response guys! Ive loaded the $5D XDF into tunerpro, along with the ATJR bin as well. Cant find a parameter for Accelleration Enrichment, and the fuel table is F60 yeah? I see what you mean about the spark tables being different, I experimented with putting a BABR chip into the EC...

Hello everyone! Ive been looking through this site for a while now, trying to get my head around the tuning of 808 roms. Waiting for the lightbulb moment! But, its just not happenig. My main goal is to be able to adjust the fuel and the timing on my S1 VN V6 manual commodore. Essentially so that I c...