still using the delco just modded for live tuning and im pretty sure its kalmaker? but there was talk on efi live software??

Paul Cibotto tuned it out of Addicted Performance in Hallam

Engine made 352rwkw @6000 rpm on 11psi and made 1700nm Had a spark issue causing a "limiter" type breakdown at 6000 which turned out to be a plug issue. Also had some belt slip. Once car is all finished I'll put a better exhaust on it and get it spun up again. Bit more Ron and boost along ...

The thermo fan on this isn't controlled via the ecu and I haven't got a check engine light permanently wired yet, although I used a test light last week and was able to count flashes so it must be working.. Yeah I have done that and run tape over the pully and marked it. It's all good this idle tune...

Ah right I knew the idle was gonna change one way or another.
Mine doesn't move and I'm bridging the white/black to earth.
The other issue I have is it runs a custom crank hub and blower pully so there no permanent timing Mark for TDC which is painfull

Was able to do everything I needed before final tune like fill trans and check fan operation etc Although I'm having an issue getting it into diagnostic mode so I can set 10degrees. From memory when the circuit at the aldl is bridged the idle normally lifts? I'm not getting any change.. And I'm wond...

So I prepped the engine yesterday to get ready for an attempted start up today. Flushed fuel system, fixed a couple of leaks etc. filled with coolant and primed the engine with oil. Dropped dizzy in and timed to around 10btdc. Plugged my Delco in that was loaded with Dylan's idle tune and attempted ...

Just a couple more things to finish off tomorrow and it will be time to hit the key next weekend!
Been 6 years since I drove this last!

Just though I'd give yas an idea of this engine and what it looks like, it's a forged bottom end with h-beams and flat tops, pavtek girdle etc. pretty much a full house engine besides having a stroker kit.. Almost everything on this engine and it's ancillaries is customised to suit. Lots of man hour...

That's impressive that you can use your smartphone to tune!
I'm in south east suburbs of Melbourne mate. Just near frankston