Got your PM and have attached an updated version of the text file posted on page 1, should answer most of both your questions. But to add some extra... 1) Call the function when bytes are available and it will handle the frame. Returns true when it has something valid and then you can do something w...

E85 isnt too bad when cold, but you need stacks of cranking fuel. Basically below about 20 deg C forget there is any ethanol when cranking, only the 15% petrol is going to light off the rest is going to do pretty much nothing. My 20 deg C PW is 48ms, stock V6 is 60 ms - essentially it is 60ms stock ...

You can set the innovate wideband to output a fixed voltage during warm up, good for a sanity check that things are working ok. Also during testing or fault finding of offsets you can do the same when its warm, so you can get two voltage points to compare offsets with. Speeds up finding ground offse...

Thanks for the update, glad you have it sorted.

Have a look here .. https://www.driven2automotive.com/blog/how-to-spot-fake-bosch-044-fuel-pumps/ The copy I have seen didnt have the helicoil insert on the inlet. It worked ok still, was in a bosch box and looked legit from all the packaging. Personally I am a fan of in tank pumps. So much quieter ...

What the internets generally knows as a Bosch Green Top is 0 280 150 558, the old EV1 style. These were factory fitted on Ford SVT lightnings and are 42lb. Had the1 test some for me a few years back and they flowed 49lb @ 55PSI (3.8 bar, which is what I was using them at). Its hard to find genuine l...

Can you post your bin? What changes from a standard cal are you trying to make?

Category view makes it much clearer what flag is for what function. It makes the whole xdf much clearer and easy to use actually.

Its actually correct and makes far more sense if you use category view as shown on page 2 of the 11P PDF. There is a flag for processing the error and then a flag for enabling the CEL when the error occurs. There is a pair for the engine code and a pair for the transmission code. The PCM code allows...

Open it up and see if the parts are installed .. viewtopic.php?f=7&t=501&p=6023&hilit=728#p6018
Need to add these if not .. https://pcmhacking.net/forums/viewt ... 740#p15740