Hey,
I'm looking at putting a DS1230Y into a v6 memcal and would like to verify I've got the pin outs correct.
Stock eprom pin 27, connected to pin 1 on DS1230Y, pin 27 on DS1230Y connected to 808 write pin.
Thanks in advance.
DS1230Y question.
Re: DS1230Y question.
Well, A14 is correct, but I don't know if there's a suitable /WE signal or if the /CS or /OE signals need modification for correct timing to permit reliable R/W operation, as the NVRAM Converter modules here include additional glue logic.
With /WE disabled, read-only operation should be OK, but then other memory types like FRAM, Flash and EEPROM become a consideration.
Joe.
With /WE disabled, read-only operation should be OK, but then other memory types like FRAM, Flash and EEPROM become a consideration.
Joe.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: DS1230Y question.
For the DS1230Y yes just those two pins.
However, they corrupt really easily without any power conditioning.
However, they corrupt really easily without any power conditioning.
Re: DS1230Y question.
Thanks.
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: DS1230Y question.
If you are considering doing this, see here: http://pcmhacking.net/forums/viewtopic. ... =30#p67045
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396