New person help
-
- Posts: 10
- Joined: Sat Jan 11, 2014 6:20 pm
- cars: VH sle 5.0 injected
Hj panel van project
80 series landcruisern1FZFE - Location: Darwin nt
Re: New person help
that's what I figured, I had a feeling I saw the lockout on a t56 mentione previously on a post here and thought the t56 function may be useful to original poster as that's what he has.
cheers gareth
cheers gareth
-
- Posts: 591
- Joined: Thu Nov 03, 2011 7:57 pm
- cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1 - Location: perth wa
Re: New person help
I was talking about auto trans when I mentioned inhibitor.
For some reason my mind went from manual to auto
For some reason my mind went from manual to auto
Re: New person help
I do have a T-56 in the car and would be good to get the reverse lock out working off the computer, I have heard that the ls1 style VSS dosnt work with the 808 ?
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: New person help
The reverse lockout can be controlled using a flex output in 12P.
The speed sensor is a reluctor on the T56, an 808 only supports a hall sensor or square wave input. Converting the reluctor to square wave can be done fairly easily with a small circuit. You could even use a camira ign module to do the conversion.
The speed sensor is a reluctor on the T56, an 808 only supports a hall sensor or square wave input. Converting the reluctor to square wave can be done fairly easily with a small circuit. You could even use a camira ign module to do the conversion.
Re: New person help
Thanks for that VL 400, unfortunately I'm a technical retard, is there an article or somewhere I can find out how to do that ? I don't need the speedo in the dash to work as I use the GPS for that but it would be nice for the T-56 VSS to talk to the 808 and also control the lockout. Thanks once again
-
- Posts: 77
- Joined: Fri Jul 02, 2010 8:53 pm
- cars: Vt v6 Berlina daily driver
vs clubsport high comp solid cammed 355 brass buttoned t56 6 speed 4.11 diff - Location: Seymour, Vic
Re: New person help
Hi guys sorry to jack the thread but I'm currently putting a t56 into my factory t5 vs clubby and also am looking for something that will convert the reluctor signal to square wave. How do I wire the camira module to suit this speedo application?
Cheers Rob
Cheers Rob
Re: New person help
dosnt the jarcar speedo corrector kit support reluctor input and square wave output? plus you can adjust it to suit the commodore speedo.
-
- Posts: 77
- Joined: Fri Jul 02, 2010 8:53 pm
- cars: Vt v6 Berlina daily driver
vs clubsport high comp solid cammed 355 brass buttoned t56 6 speed 4.11 diff - Location: Seymour, Vic
Re: New person help
I looked into that unit Jayme but all my research couldn't tell me whether it was able to convert sine to square and plus I've already purchased a speedo corrector box but I could sell it on if the jaycar unit is what I'm after.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: New person help
I havnt used the function but a jaycar corrector supports reluctor in and hall out. It can also have sort of reluctor out by the looks of the circuit.
-
- Posts: 77
- Joined: Fri Jul 02, 2010 8:53 pm
- cars: Vt v6 Berlina daily driver
vs clubsport high comp solid cammed 355 brass buttoned t56 6 speed 4.11 diff - Location: Seymour, Vic
Re: New person help
Thanks vl ill contact jaycar today and talk to them about it. Cheers