Ecotec in a vn
Ecotec in a vn
hi guys im new to all this tuning stuff for commodores im looking for a ecu set up so i can tune it
Re: Ecotec in a vn
Can be done with the VN ecu, I think the tune for it with 12p is on the forums.
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Ecotec in a vn
yeah there is one, but its on the old version of 12P. I did migrate it but seems some tables were blank after doing so.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8237
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ecotec in a vn
Compare / diff that versus the same version stock tune. Record tables with differences. Run 2 copies of tunerpro (via the tunerpro menu item) then copy those tables from original to new (correct version xdfs loaded to match bins in each copy). Then if you want to contribute (hopefully) post up the new for others.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396