VP Aftermarket Memcal Help
VP Aftermarket Memcal Help
I have a memcal here labeled VP. Its off a V6. I have a read here but i cant get any of the factory XDF's to display any usefull info.
Possibly custom code which really suprises me.
My GQ4X says its a M26C256B. I will post the BIN up and hopefully someone can help me get some info out of it.
Ive been ask to tune this car and this is what theyre running now. Car is not registered and dyno time is not an option at the moment
so to prevent going backwards id love too see what I have here.
All help appreciated.
Possibly custom code which really suprises me.
My GQ4X says its a M26C256B. I will post the BIN up and hopefully someone can help me get some info out of it.
Ive been ask to tune this car and this is what theyre running now. Car is not registered and dyno time is not an option at the moment
so to prevent going backwards id love too see what I have here.
All help appreciated.
- Attachments
-
- VPpcmhnet.bin
- (32 KiB) Downloaded 211 times
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VP Aftermarket Memcal Help
sme version of vr manual code maybe
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VP Aftermarket Memcal Help
Being 32k maybe. I might try a few of them xdf's. I only went through the VN xdf's.
Re: VP Aftermarket Memcal Help
I originally read it as a 128k chip. It read ok without errors. Then used the ID function on the GQ4X software and it said the M26C256B. So read it as that. Worth me posting the 16k bin?
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VP Aftermarket Memcal Help
Whats it physically look like? Might be copy protected. There seems to be a big chunk of data missing where i'd expect the code to be. That would also throw the1's id tool off. 256kbit is 32kbyte so the size is correct.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: VP Aftermarket Memcal Help
if its a copy protected one, you might be able to put it in an aldl enabled 808 and use the flashtool to grab the tune. thats how I generally download the tune from copy protected memcals.
Re: VP Aftermarket Memcal Help
Worth a try thanks
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VP Aftermarket Memcal Help
yeah my thought was something with copy protection or a dodgy read ....
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VP Aftermarket Memcal Help
Its a normal looking eprom with no other bits on their. I will do a get bin with flashtool tomorrow see what happens.
Anyone able to "see" any tables there like spark or ve?
Anyone able to "see" any tables there like spark or ve?
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: VP Aftermarket Memcal Help
Could be the car this memcal came from is a NOS Sprint racing car. The bin is the official NOS Sprint bin for methanol injectors. It is 100% intact byte for byte. Also uses High speed data (8192). Has no injector BPW adjustment in data settings. Better off converting this to 12P.
Dylan wrote:I have a memcal here labeled VP. Its off a V6. I have a read here but i cant get any of the factory XDF's to display any usefull info.
Possibly custom code which really suprises me.
My GQ4X says its a M26C256B. I will post the BIN up and hopefully someone can help me get some info out of it.
Ive been ask to tune this car and this is what theyre running now. Car is not registered and dyno time is not an option at the moment
so to prevent going backwards id love too see what I have here.
All help appreciated.