marinized v12 running 2 x 808's

jenko · Post by **jenko** » Sat Mar 28, 2015 5:23 pm

have done another tune today in kal 3 and spent a bit of time going throughthe 12p programing ,getting ready to swap, waiting for cable,
thought i would post the bin.

1BOAT.zip: (32.14 KiB) Downloaded 278 times

might look abit strange in places as there is no idle speed control
knock ,speed sensor
I just need to have a play with ignition timing when cold to up the idle speed

jenko · Post by **jenko** » Sun Mar 29, 2015 6:04 am

posted video of running on last tune
https://www.youtube.com/watch?v=o9G6cUf ... e=youtu.be

Dylan · Post by **Dylan** » Sun Mar 29, 2015 9:11 pm

I had a look over your BIN's. I could put the latest boat one into a 12P version for you?
Wont take much, run your wide band on it and post up some logs?

jenko · Post by **jenko** » Sun Mar 29, 2015 9:19 pm

That would be great thanks Dylan .
The kal3 runs a ds1230y chip is that compatable 0r would I have to upgrade to the 1245y
I am assuming I just re program the 12p bin into the eprom on my programer then put it in the kal set up and link up with tuner pro?

jenko · Post by **jenko** » Sun Mar 29, 2015 9:23 pm

Id love to see some screen shots of SP2. Never seen that interface. I once had SP3

same as sp3 without o2 trace and lower resolution

Dylan · Post by **Dylan** » Sun Mar 29, 2015 9:28 pm

jenko wrote:That would be great thanks Dylan .
The kal3 runs a ds1230y chip is that compatable 0r would I have to upgrade to the 1245y
I am assuming I just re program the 12p bin into the eprom on my programer then put it in the kal set up and link up with tuner pro?

I know it's compatible not sure on the burning offset though. Both 12P and SP3 are both 32k.
Once it's on just connect with tuner pro 5 RT.

Post by **VL400** » Sun Mar 29, 2015 10:36 pm

Need to use 0 offset when using a DS1230 and 12P, can only get the one bin on the NVRAM but still have the map switching software option (map a and map b items in the XDF).

Dylan · Post by **Dylan** » Mon Mar 30, 2015 9:13 pm

Here's a go at swapping the SP3 boat into 12P.
I've changed the idle advance but put your AFR's and spark into map A.
Modified afr's and spark by myself are on map b.

Id look at running stock afr's or mine and modify the VE to suit with your wideband.
Once the VE is right might it be able to take a bit more advance.
Use the compare tool and compare with BLCD tune to see what was changed. Use 12P112 XDF and ADX when logging.

jenko · Post by **jenko** » Mon Mar 30, 2015 11:11 pm

thanks Dylan shall give it a go as soon as the cable turns up

jenko · Post by **jenko** » Mon Sep 28, 2015 12:46 pm

I have finished the engine install in the boat

marinized v12 running 2 x 808's

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: convert kal2 to kal3

Re: marinized v12 running 2 x 808's