L67 manual ecu choices

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

L67 manual ecu choices

Post by holden08 »

What ecu would I be better of using for a vn calais l67 conversion the 808 or the factory pcm it will be manual aswell
Dazza92VP
Posts: 607
Joined: Sun Jun 06, 2010 9:59 am
cars: 92 VP V8 Wagon
Location: Perth

Re: L67 manual ecu choices

Post by Dazza92VP »

Really depends on what system your more comfortable with if you comfortable with tuning map based system use the 808 with $12p or if you more comfortable with maf tuning use the old. Using the older 808 ecu will mean less wiring to do but more tuning the l67 will mean more wiring but has a factory tune already for a good base but you will have to mod the ecu to use the older vss or buy one of festys speedo correctors
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: L67 manual ecu choices

Post by holden08 »

Ok can I use the factory l67 auto pcm and tick the manual flag, use festys speedo corrector and use the1s enhanced bin
Dazza92VP
Posts: 607
Joined: Sun Jun 06, 2010 9:59 am
cars: 92 VP V8 Wagon
Location: Perth

Re: L67 manual ecu choices

Post by Dazza92VP »

Yea that should do it but what gearbox are you using the t5 or the getrag box if your using the getrag box you won't need the speedo corrector
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: L67 manual ecu choices

Post by holden08 »

I'm going to use a t5
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: L67 manual ecu choices

Post by VL400 »

What model of L67 PCM are you using?

VS L67 PCM wont read the T5 sender, but can be modified to do this. http://pcmhacking.net/forums/viewtopic. ... 740#p15740

VT and later support both sensor types.
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: L67 manual ecu choices

Post by holden08 »

Oh ok can I use festys vss corrector. will vt pcm fit the vs l67 loom
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: L67 manual ecu choices

Post by holden08 »

VL400 wrote:What model of L67 PCM are you using?

VS L67 PCM wont read the T5 sender, but can be modified to do this. http://pcmhacking.net/forums/viewtopic. ... 740#p15740

VT and later support both sensor types.
The l67 has a vt pcm
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: L67 manual ecu choices

Post by holden08 »

Do I put the t5 speed sensor onto pin D2 like the vs
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: L67 manual ecu choices

Post by The1 »

some VS L67 PCM's will read T5, it was after a certain serial number i think, they had the extra components, i have seen a few with and some without.
Post Reply