VP Thermo Fan Temps
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VP Thermo Fan Temps
the issue with the V8's is that they relied on the engine fan, so if you are going to use the thermo fan as the primary source of cooling then you need to set it to a more suitable number.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VP Thermo Fan Temps
Thanks for your replies guys, I have the info I need to explore the next part of the puzzle, changing the temp values in the calibration.....
I have been digging through the getting started guides to determine the best way forward, I might have to look for another memcal with knock board and start playing with the eeprom boards if they are still available??
Rohan
I have been digging through the getting started guides to determine the best way forward, I might have to look for another memcal with knock board and start playing with the eeprom boards if they are still available??
Rohan
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VP Thermo Fan Temps
just about everything you need will be available and / or listed in the for sale section.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VP Thermo Fan Temps
EEPROM's are great and cheap. Go big I say. USB comms 12P and NVRAM.
There's hour's of reading for you.
There's hour's of reading for you.
Re: VP Thermo Fan Temps
sorry to hijack but how do i turn on the fan(v8) and change the temps in 12p using tunerpro RT? im only just starting out and want the ECU to switch the thermos on/off .. ecu is a 808 usb coms nvram
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VP Thermo Fan Temps
wire 12v to the fan relay coil and the ground side to the fan pin on the delco.
load the 12p xdf, and the appropriate 12p bin for your car, hit ctrl+f for find, pick 'a scalar', words 'fan', hit search. Pick 'Fan Params - High Speed fan ON coolant threshold (5degC hysteris), change. To do realtime changes, see the guides in the FAQ (top right).
5 degrees hysteris means that it'll go off 5 degrees below the on temp. This is not configurable. So if you change ON to, say, 95 degrees, it'll go off at 90.
load the 12p xdf, and the appropriate 12p bin for your car, hit ctrl+f for find, pick 'a scalar', words 'fan', hit search. Pick 'Fan Params - High Speed fan ON coolant threshold (5degC hysteris), change. To do realtime changes, see the guides in the FAQ (top right).
5 degrees hysteris means that it'll go off 5 degrees below the on temp. This is not configurable. So if you change ON to, say, 95 degrees, it'll go off at 90.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: VP Thermo Fan Temps
thanks antus
Re: VP Thermo Fan Temps
Hi Guys,
Quick update, thanks to Jayme I managed to get a USB Comms kit and NVRAM board and figured out how to change the fan temps as Antus mentioned above, all good and a great solution some talented guys here have put together
Off to learn more about TP now and see what else I can play with and hopefully not break
Rohan
Quick update, thanks to Jayme I managed to get a USB Comms kit and NVRAM board and figured out how to change the fan temps as Antus mentioned above, all good and a great solution some talented guys here have put together
Off to learn more about TP now and see what else I can play with and hopefully not break
Rohan