Vs Pcm into Vn ? Issues.

[Dylan]

As in the VR VS model not the earlier VN VP type?

[immortality]

Stage 3 shift kit = fully manualised

Does it now have a vacuum module or cable like the earlier T700 transmission for line pressures?

[Dylan]

That's what I'm wondering

[TuffvngrpA]

The vr vs model gearbox. 4l60e. It now has a vacuum module. It is definitely full manual

[Dylan]

Ok vacuum module. So you need a VN V8 engine wiring loom. Then someone to convert current tune to compatible code with the VN ecu. Id recomend 12P.

Speed signal you can buy a signal converter from user Festy on here. That will give the right signal for the VN ecu and also can correct the pulses for diff gear changes etc.

[immortality]

Doesn't the VR/VS dizzy have a slightly different plug to the VN one?

[Dylan]

They are different good pick up. Cut the plug off your VR loom and solder to the VN loom.

[TuffvngrpA]

Already sorted the dizzy issue have put my Vn dizzy in the be engine. Am planning to run everything Vn and thanks Dylan that sounds like my best approach get the tune to suit the Vn PCM.
Am also chasing twin throttle body manifold or something better than the bunch of bananas I have now if anyone knows or has anything.

[TuffvngrpA]

Not forsale just thought ide share with my fellow Delco fans.

[Dylan]

Keeps getting easier. I can take a read of this chip if you want see what I can make of it.
I do have a couple tunes here of other 304's with banana intake and a 286 as well.