Holden Vy v6 dash 3 window

[Saintsinnerx]

Hey guys and gals im in quite the bind atm..
i recently swapped a s1 3 window ( unknown if v8 / ute / sedan etc ) into my s1 Berlina
dash works fine ( i managed to pop srs airbag fault ) but that was my own fault forgot to plug the seat back in
anyway ive been searching high and low for someone who can re-program my dash without me needing to send it away ( i don't have the old one anymore sold it )
i believe the dash might have been out of a v8 but im not sure.. so i was curious if anyone knows someone in brisbane who could re program it and roughly how much ill be looking at?
i bought a cable from ebay and started reading the tech files about modifying it myself but the cable appears to be a DOA sadly so if anyone could help that would be amazing
i hope this is in the right section if not i do apologize

[0081]

Anyone with a tech 2 can do it.

There are a few other ways to get it done but the tech 2 option probably the easiest.

[Saintsinnerx]

a family friend borrowed a tech 2 from his boss and kept getting miss communication error and believed it was from the cluster being different but they charge 88$ a scan so not exactly cheap.. so kinda hoping for someone in brisbane who knows exactly what they are doing ( he doesn't have much experience with a tech 2 )

[The1]

im just outside of toowoomba if you get stuck

[Saintsinnerx]

it's looking like i might be getting stuck ive posted on 5 forums and about 10 facebook pages all with no luck so far.. Ill PM you The1