first time tuning

[siktrk]

Ive posted a few bit of posts on this page and everyone has been helpful

Hopefully the motor and everything will be running today
Its a vp manual with a vr motor with a t70 turbo bolted on and running 42lbs injectors

First things first how should i approach this on tunerpro and adjust boost according to the timing

[Dylan]

I've never tuned a boosted motor but first up set the map sensor so either 2 or 3 bar depending on your boost level.
Then set the injectors up. Injector rate of 0.30 should be good with a rising rate fuel reg of course. Then set the opening times and add on times.

Is it a stock motor otherwise?

[siktrk]

Yer its a stock motor for now man

[festy]

Have a read of the Advanced tuning guide - it describes where to start with tuning boost
http://pcmhacking.net/forums/viewtopic.php?f=28&t=3051

[Dylan]

Scrap the old motor in the end did you? Stock motors have worked well for others on boost in the past.

http://pcmhacking.net/forums/viewtopic.php?f=7&t=4256

[siktrk]

Nah still have the other motor gonna figure out why my i had no compression and get my heads tested

Would i need to use a stock vr v6 manual tune and start from there

[Dylan]

If it's a stock motor I would.

[siktrk]

Is there any stock vr v6 manual on here and where abouts would it be dylan if you dont mind me asking

[Dylan]

In the 12P zip is stock BIN's

[siktrk]

Ok sweet thanks man