VS Low Series BCM Security Pin

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
jacomms
Posts: 81
Joined: Thu Jun 11, 2009 12:25 am
cars: Commodore's .....what else?? :-)
Location: Goulburn, NSW

VS Low Series BCM Security Pin

Post by jacomms »

Hi Guys

So a mate of mine bought his son his first car the other day (Holden Commodore VS III V6 5 speed Ute) from a storage shed auction.
Now the issue is .... no key & no remote.
New locks & keys fitted, plug Tech1 in ....select BCM.... security.... program key ..... all new keys..... type in 6 digit security pin (this is where the fun stopped)

My questions is among the collective genius of this group as this issue been struck and resolved without BCM & remote swap.
Back when VS was a current model I remember making request via TIS to get codes but I am no longer able to make these requests.
It was as simple a request along with VIN.

(A little thought in the back on my head keeps telling me something about drivers door open and ign on for 2+ hours and BCM over ride takes place on the security....... or was this on something else?)

Thoughts anyone?

Justin
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VS Low Series BCM Security Pin

Post by Dylan »

Might be easier to get a matching key head and BCM from a wrecker or ebay.
User avatar
Gareth
Posts: 2505
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: VS Low Series BCM Security Pin

Post by Gareth »

After market scan tools don't require security code...

No such thing as key on code security over ride, works on early Ford after 45mins
According to chemistry, alcohol is a solution...
jacomms
Posts: 81
Joined: Thu Jun 11, 2009 12:25 am
cars: Commodore's .....what else?? :-)
Location: Goulburn, NSW

Re: VS Low Series BCM Security Pin

Post by jacomms »

Sweet ... I will grad the OTC from the workshop and try with that. I have only ever used the Tech1 for VS keys.

Thanks
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VS Low Series BCM Security Pin

Post by The1 »

holden scantools dont require the code either, just program additional key NOT a new key. Which is all the aftermarkets give you the option for.

The New key option with the security code is for programming a key when the BCM is sitting on the bench by itself.
jacomms
Posts: 81
Joined: Thu Jun 11, 2009 12:25 am
cars: Commodore's .....what else?? :-)
Location: Goulburn, NSW

Re: VS Low Series BCM Security Pin

Post by jacomms »

Security override for the BCM was 2 hours (it was a series III)
All the required info was listed on the old TIS CD.

Thanks The1 - Nailed it!

Thanks again guys

Justin
Post Reply