vr ecu/ pcm help.
vr ecu/ pcm help.
Hey guys, im new here. But I just recently did an engine swap into my vp. It is currently running a vr series 2 with t5 box. So I was just wondering if you guys could point me in the right direction to aftermarket ecu's or memcal tuners or something around that area. It must be able to handle futre mods aswell, turbo, cam, e85 and so on. Cheers
-
Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vr ecu/ pcm help.
you can do all that with the stock computer with the right mods!
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: vr ecu/ pcm help.
Have a look under FAQ (see the icon up near the top right) and have a read. If you want to know tuners in your area post your area. You dont need to go aftermarket but you do need to cover a steep learning curve yourself or find a decent tuning shop that can handle it for you. Many tuning shops dont want to know about the old delco pcms, so asking here as you have done is your best bet.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396