Hi all,
Just bought a vt v8 with ecu, putting it in a Torana.
How do I go about getting the VATS removed so I don't need to run a BCM?
And will I need to do anything else for it to just wire up and run?
Thanks
Located in Wollongong
5L 304 v8 motor
VT V8 How to go about VATS removal (304 v8)
VT V8 How to go about VATS removal (304 v8)
Last edited by Jackson. on Tue May 10, 2016 4:46 pm, edited 2 times in total.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VT V8 How to go about VATS removal
if you have the eprom programming hardware and a burner you can easily do it yourself, if not you can post the memcal to someone who can do it for you, might be worth posting your location and someone might even be local.
As for the anything else, will just be a matter of sitting down with a wiring diagram and working out what you need and don't need to make it work.
As for the anything else, will just be a matter of sitting down with a wiring diagram and working out what you need and don't need to make it work.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VT V8 How to go about VATS removal
I don't currently have the hardware but wouldn't mind learning, how much does it usually set you back?
I've also included location, thanks
I've also included location, thanks
Re: VT V8 How to go about VATS removal
A good quality burner a GQ4X around $150. A UV eraser around $30. And some freight on that.
Both can be brought from Dark Wire.
Or post in the wanted section and see who can sort you out. Well worth getting some mods to the stock tune too there's some gains to be had. Ive done a few VT's now they get a heavy ass VT moving ok let alone a Torana. You should start a build thread I love Torana's.
Both can be brought from Dark Wire.
Or post in the wanted section and see who can sort you out. Well worth getting some mods to the stock tune too there's some gains to be had. Ive done a few VT's now they get a heavy ass VT moving ok let alone a Torana. You should start a build thread I love Torana's.
Re: VT V8 How to go about VATS removal
Might just have it done, what's the average price?
Yeah I'll definitely be looking into that
Yeah I'll definitely be looking into that
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: VT V8 How to go about VATS removal
VT came with 304 and gen3. The 304 is within reach of most of us on the forum but the gen3 requires more expensive software. Please post more info.
Re: VT V8 How to go about VATS removal
Sorry forgot to mention which motor,
Original post updated
Original post updated