Chasing Bin to suit VN 5.0L, Vortech V2, 1000cc inj, E85,

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
prolectric
Posts: 15
Joined: Wed Aug 17, 2016 9:41 pm
cars: 1981 VH SLE Holden 5.0 Vortech V2

Chasing Bin to suit VN 5.0L, Vortech V2, 1000cc inj, E85,

Post by prolectric »

G'day lads, this is my first post but i have had a few engines built over the years and always kept the delco ecu. I know its a powerfull unit just can be tricky to tune correctly. My issue is i have a brand new engine and i want to start and idle it to make sure everything is in order before it goes to get a propper tune. There isnt that many tuners in my area that are able to tune the delco system. I was wondering if anyone had or could make a bin file that would get my engine to start and idle? That is all im after for now. Any help would be greatly appreciated!

Specs are as follows

1988 VN V8 5.0l
Torque Power Duel Plane High Rise Manifold
Bosch 1000cc injectors (can supply dead times if needed)
CamTech Solid Roller Camshaft (intake lift @ valve .625" exhaust @ valve .657" duration @.050 inlet 244 exhaust 249 LSA 114)
E85 FUEL
Extensivly Ported Vn Cylinder heads
Twin Bosch 044 Pumps
9.0:1 Compression (approx)
LS1 Throttle Body
ICE Ignition System
Vortech V2 Supercharger
2 bar Map sensor

Thanks In Advance!
James
Attachments
bosch1000.jpg
bosch1000.jpg (26.46 KiB) Viewed 1383 times
Post Reply