wideband tuning with vr 355 auto

[jezza351]

has anyone integrated a wide band into their computer for tuning using $11p on a 424 ?

i have an innovate lm2 and would like to try and use it to help tune my vr , been scanning through the forums but couldn't find much .

the lm2 does have analogue outs on the control box, would it be easier to run the signal out to the comp?

cheers guys

[Jervies]

Its usually the injector voltage monitor line that gets replaced with the 0-5v wideband ouput

[jezza351]

Its usually the injector voltage monitor line that gets replaced with the 0-5v wideband ouput

so would i be able to run an extension wire with a terminal from the injector voltage monitor pin then connect to the analogue out for the wideband from the lm2 box?, I don't want it to be a permanent setup just until the tune is done , then take it all out.

can the lm2 be used to help tune by just running it through the laptop into tunerpro ?

[VL400]

Have a read of the pdf file included in the 11P zip. It tells you the dedicated pin for the wideband analog output (analog 1 for the LM2), and a small mod if there is an offset of readings. Its not the injector monitor.

[jezza351]

Have a read of the pdf file included in the 11P zip. It tells you the dedicated pin for the wideband analog output (analog 1 for the LM2), and a small mod if there is an offset of readings. Its not the injector monitor.

ok so D8 is it which is a spare, cheers vl400

think ive got my head around setting it up now , so once its up and logging you would just make changes to the ve tables to get to the desired afr ?

sorry for the questions , incorporating a wideband into the comp is new to me

[antus]

Have a read of the guides for 12p which 202t has written which are in the faq area (see link near top right). Changing the ve table would be normal usually but it depends what your doing.

[jezza351]

All good Cheers Antus , makes sense now . Looking forward to getting it done .