Code: Select all
[22:58:48:366] Attempting to Connect to Comport...
[22:58:48:378] Searching for Device...
[22:58:49:208] ELM Device Successfully Found!
[22:58:49:211] Checking ELM Status..
[22:58:49:214] ELM is Idle
[22:58:49:215] Disabling Echo...
[22:58:49:224] Echo Disabled Successfully!
[22:58:49:225] Checking ELM Status..
[22:58:49:226] ELM is Idle
[22:58:49:226] Disabling LineFeed...
[22:58:49:242] LineFeed Disabled Successfully!
[22:58:49:243] Checking ELM Status..
[22:58:49:244] ELM is Idle
[22:58:49:246] Enabling Headers...
[22:58:49:256] Headers Enabled Successfully!
[22:58:49:257] Checking ELM Status..
[22:58:49:258] ELM is Idle
[22:58:49:259] Allowing Long Frames...
[22:58:49:272] Long Messages Enabled!
[22:58:49:273] Checking ELM Status..
[22:58:49:274] ELM is Idle
[22:58:49:275] Setting Timeout...
[22:58:49:288] Timeout Set Successfully!
[22:58:49:289] Checking ELM Status..
[22:58:49:290] ELM is Idle
[22:58:49:291] Setting CAN 11Bit 500Kb Protocol...
[22:58:49:303] Protocol Set Successfully!
[22:58:49:305] Checking ELM Status..
[22:58:49:306] ELM is Idle
[22:58:49:307] Disabling CAN Auto Format...
[22:58:49:320] CAN Auto Format Disabled!
[22:58:49:321] Checking ELM Status..
[22:58:49:322] ELM is Idle
[22:58:49:323] Setting CAN Error Format...
[22:58:49:335] CAN Auto Format Set!
[22:58:49:337] Checking ELM Status..
[22:58:49:352] ELM is Idle
[22:58:49:353] Connection Established!
[22:58:49:384] Checking Input Voltage..
[22:58:49:399] Voltage Found!
[22:58:49:402] Checking ELM Status..
[22:58:49:403] ELM is Idle
0.19=
Code: Select all
[22:58:02:446] Attempting to Connect to Comport...
[22:58:02:454] Searching for Device...
[22:58:03:282] ELM Device Successfully Found!
[22:58:03:286] Checking ELM Status..
[22:58:03:287] ELM is Idle
[22:58:03:288] Requesting Fast 115200 Baud..
[22:58:03:298] ELM Device Accepted Baud, Check Communications..