Hi Tazzi,
I connected up tonight and had no issue with SOE connecting to the same port as the elm ie com port 4 but did have an issue with the lappy losing the device driver.
Last time my lappy showed the elm as com port 4 but SOE searching for com port 7. This time the l/top was still on com port 7 but I had to change the port setting to 4 and
re-install the device driver.
After the above,SOE found the correct com port 4 to the device com port...so all good there.
These are the steps I took....
- def1.png (127.74 KiB) Viewed 4120 times
- def2.png (118.52 KiB) Viewed 4120 times
- def3.png (123.75 KiB) Viewed 4120 times
I also had this fault code but i'll have to check with my tech 2 if its an actual fault code present.
- def code.png (46.46 KiB) Viewed 4120 times
Def a freeze frame issue.
Let me know if you want more testing