OSE 11P V104
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: OSE 11P V104
Doesn't really matter when 3 fire at once all cylinders getting fuel at different valve timing events
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 2910
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: OSE 11P V104
Yeah true, just thought it was odd it had the injection delay table there!
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: OSE 11P V104
Stock vn code had it too with 2 cells near idle changed God knows what effect it has
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: OSE 11P V104
12P has a 50% value in the V6 CAL's (from memory) and V8 has it zeroed out. From my knowledge it is an opening delay more so than a EOI timing. That 50% value is in the idle cells say 800rpm 40kpa.
I've re tuned V6's with that value at zero and all is ok.
I've re tuned V6's with that value at zero and all is ok.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 11P V104
It delays the start of injection in relation to the reference pulse (the pulse from the dizzy/crank at the reference angle set in the cal), on a batch system I also dont know what this achieves.
- vlad01
- Posts: 7849
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: OSE 11P V104
I don't think it will achieve anything
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: OSE 11P V104
noticed in xdf Kickdown - Kickdown Mode - Downshift KPH THreshold table has wrong axis labels
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 11P V104
Thanks, will fix that.
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: OSE 11P V104
Not sure if it just a moddified adx issue or its on originals aswell but ve trace doesnt leave 20kpa colum?
Also the historgram table res is different to the histogram excel document lol.
Used 11p a few times now it works well. Have a 7000rpm spark cut
Also the historgram table res is different to the histogram excel document lol.
Used 11p a few times now it works well. Have a 7000rpm spark cut
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 11P V104
The VE tracing issue is due to baro compensated MAP being used for the VE table - this is the term the ECU is using for its lookup so is more accurate. If you use a ADX that is not for 11P V104 it will likely not work correctly. If one of the ADXs in the included 11P zip does not work can you let me know which so it can be fixed.
For the excel spreadsheet you can change the the ADX histograms to suit anything you would like. Or add new ones to do new and different things. Whats in the ADX is just a starting point and wont support every spreadsheet on this site.
For the excel spreadsheet you can change the the ADX histograms to suit anything you would like. Or add new ones to do new and different things. Whats in the ADX is just a starting point and wont support every spreadsheet on this site.