Possible VSS For Cable Speedo Cpnversions
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Possible VSS For Cable Speedo Cpnversions
well while researching for lada info for our french buddy I came accross this pic of the lada VSS for the delco ecu.and low and behold it has a cable output with a dust cap on it as well as the stock 3 wire pulse output setup .looks good for an easy swap for certian gearboxes with threaded speedo cable drives.availiabuility of the part is an unknown.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Possible VSS For Cable Speedo Cpnversions
degreaser ??
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Re: Possible VSS For Cable Speedo Cpnversions
These are on Ebay. Just search for Lada Niva Speed Sensor.
I have ordered one from Russia. Will see what it fits.
Rock Lob
I have ordered one from Russia. Will see what it fits.
Rock Lob
If you can't be a good example, be a horrible warning.
- vlad01
- Posts: 7845
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Possible VSS For Cable Speedo Cpnversions
what about one of these?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Possible VSS For Cable Speedo Cpnversions
price???
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- vlad01
- Posts: 7845
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Possible VSS For Cable Speedo Cpnversions
never bought one, google search came up with this one
http://www.quadratec.com/products/95202_000.htm
http://www.quadratec.com/products/95202_000.htm
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Re: Possible VSS For Cable Speedo Cpnversions
Looks higher quality than the Lada one. Then again, the Lada one was only $18 delivered.
Rock Lob
Rock Lob
If you can't be a good example, be a horrible warning.
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Re: Possible VSS For Cable Speedo Cpnversions
Here's a great source for VSS sensors that go between the gearbox and speedo cable, or splice into the speedo cable :- http://www.brantz.co.uk/sensors.htm
Rock Lob
Rock Lob
If you can't be a good example, be a horrible warning.
Re: Possible VSS For Cable Speedo Cpnversions
found this might be good for anyone who cant hook into the cable for output
http://www.jegs.com/i/JEGS-Performance- ... Id=2461660
http://www.jegs.com/i/JEGS-Performance- ... Id=2461660