pcmhacking.net

Edit 3/3/23: Removed option "2" from VATS G1201. Now the parameter only offers 2 options, Serial Class 2 and none.

Edit 1/16/23: Flipped VTD Configuration and G1201 - VATS. Verified with EFI Live.

Edit 10/16/22: Added a couple parameters and just some general clean up. Also bundled the checksum plugin with the xdf.

Edit 8/31/22: Fixed the READ ME description so that it would match the OS number. Also added transmission pressure profile parameters.

Edit 7/14/22: IF YOU DOUNLOADED A VERSION PREVIOUS TO V.2.0 PLEASE DELETE IT AND REPLACE WITH THE FILE ATTACHED BELOW!!!
I made a mistake and most of the engine parameters where offset by 2 or 4 bytes, basically rendering the XDF useless. That has been addressed and a couple of extra tables added. Thanks for your patience and please let me know if you see any errors.


I developed this XDF based on the 7603 file that is on here. Feel free to use and give feedback for anything that may need to be touched up. This is a collection of work from many people, so I cannot take complete credit.

Thanks! stickied the topic so it can easily be found

Major revisions to the XDF, please see first post.

Is this xdf for os 12592618? In Tunerpro it says only to use 12587603 bin files just want to double check before

cloud9.214tex wrote:Is this xdf for os 12592618? In Tunerpro it says only to use 12587603 bin files just want to double check before

I based the 12592618 XDF off of the 12587603 XDF, I had just forgot to update the READ ME parameter with the correct OS number. I've made the update and uploaded a new version with this fix and a few more transmission parameters.

Phoenix,
I am using this XDF and have a question on VATS. Under G1201 for VATS it has 0 for "serial class 2", 1 for "pwm" , and 2 for "none". I select 2. For VTD Configuration it has 0 for "class 2" and 1 for "none". I select 0 for "none" and write with PCM Hammer. Hptuners shows VATS control as PWM when I read it. Is this actually disabling VATS or is something missing yet?

I would say this needs some looking into ...

Looks to me like VTD Configuration and VATS (G1201) are backwards.

My info shows G1201 should be address 0x1F779 and has value meanings of 0 = Class2, 1 = None.

I have no way to test, to prove it out!

-Enjoy

Gampy,
I believe that you are correct. I modified the XDF in TunerPro for the VTD configuration. I changed it to allow values 0,1, and 2 mimicking what G1201 allows. I set the Value to 2 and sure enough, HPtuners shows no VATS fitted.

Thanks for catching that! I've flipped VTD Configuration and G1201 - VATS and verified with EFI Live that now changing the G1201 value in Tunerpro will match the value in EFI Live. I have no way of testing it in HPT.

That's just it, they disagree, it needs to be sussed out other ways ...

-Enjoy