[08:35:45:278] PCM Hammer 014 [08:35:46:389] Thanks for using PCM Hammer. [08:35:46:492] Device Found: OBDX Pro VT [08:35:46:620] Device Successfully Initialized and Ready [08:36:14:011] Will save to C:\Users\Paul\Documents\test.bin [08:36:15:880] Querying operating system of current PCM. [08:36:26:318] Operating system query failed, will retry: Error [08:36:26:789] Unable to transmit, Error: 8C FE F0 3F [08:36:29:971] Unable to transmit, Error: 8C FE F0 3F [08:36:33:114] Operating system query failed: Error [08:36:33:119] Unable to get operating system ID. Will assume this can be unlocked with the default seed/key algorithm. [08:36:33:156] Unable to transmit, Error: 8C FE F0 3F [08:36:34:435] PCM is already unlocked [08:36:34:439] Unlock succeeded. [08:36:34:470] Attempting switch to VPW 4x [08:36:34:499] Module 0x10 (engine controller) has agreed to enter high-speed mode. [08:36:36:832] Requesting permission to upload kernel. [08:36:40:094] Requesting permission to upload kernel. [08:36:40:216] Requesting permission to upload kernel. [08:36:43:483] Requesting permission to upload kernel. [08:36:43:612] Requesting permission to upload kernel. [08:36:43:731] Permission to upload kernel was denied. [08:36:43:735] If this persists, try cutting power to the PCM, restoring power, waiting ten seconds, and trying again. [08:36:43:739] Failed to upload kernel to PCM [08:36:43:783] Clearing trouble codes. [08:36:44:846] Elapsed time 00:00:10.4020711 [08:36:44:850] Read failed, Error