Search found 25 matches
- Tue Dec 27, 2022 5:40 pm
- Forum: Holden ALDL ECUs
- Topic: getting my fuel usage accurate
- Replies: 5
- Views: 2046
Re: getting my fuel usage accurate
be careful with the bosch green 440cc injectors some are double squirt i ran into this with a set someone had put in a vn v8 and i set the correct value for the injectors but could not work out why it was still over fueling untill i halved all the values in the ve tables.
- Tue Dec 27, 2022 5:37 pm
- Forum: Holden ALDL ECUs
- Topic: getting my fuel usage accurate
- Replies: 5
- Views: 2046
Re: getting my fuel usage accurate
be careful with the bosch green 440cc injectors some are double squirt i ran into this with a set someone had put in a vn v8 and i set the correct value for the injectors but could not work out why it was still over fueling.
- Fri Sep 24, 2021 2:15 am
- Forum: Holden ALDL ECUs
- Topic: Adelaide members with a burner
- Replies: 1
- Views: 1656
Re: Adelaide members with a burner
hey send me a message im in adelaide with a burner and can do this.
- Wed Dec 16, 2020 12:44 am
- Forum: Hardware Modification and Development
- Topic: Programmable Delco Ignition Module
- Replies: 324
- Views: 245178
Re: Programmable Delco Ignition Module
I'm Keen for 1 aswell
- Fri Jul 12, 2019 5:31 pm
- Forum: Holden ALDL ECUs
- Topic: can i run 2 oxygen sensors in vs s3 5l
- Replies: 0
- Views: 2401
can i run 2 oxygen sensors in vs s3 5l
just wondering if i am able to run 2 oxygen sensors on a series 3 5l with sequential injection if so what pins do i run the rh oxy sensor to?
- Fri Dec 21, 2018 10:26 am
- Forum: Holden ALDL ECUs
- Topic: vs v6 rev limiter change
- Replies: 2
- Views: 1772
Re: vs v6 rev limiter change
im using the1 enhanced vs n/a bin and xdf im not sure if this will work but i downloaded the vy s/c which has the rpm limiter unlocked and copied the global equation and changed it to (16bit) in the xdf which then allowed me to change the limiter number to 7500rpm
- Fri Dec 21, 2018 9:18 am
- Forum: Holden ALDL ECUs
- Topic: vs v6 rev limiter change
- Replies: 2
- Views: 1772
vs v6 rev limiter change
hey im looking for help changing the rev limiter in a mates speedway car it has a vs v6 in it and he want to change the rev limiter to 7500 all the xdf files i have only allow the rev limiter to 6375rpm can somebody please help me?
- Sun May 14, 2017 9:09 pm
- Forum: Holden ALDL ECUs
- Topic: clearing srs airbag light in vs
- Replies: 9
- Views: 6265
Re: clearing srs airbag light in vs
yeah i have thankyou ive just ordered a vpecker off ebay ill see how that goes.MAGP wrote:Did you read the thread I linked to? There are suggestions in that.barnsie46 wrote:ok do you know the best scan tool that clears these codes cause tech1's are very hard to find these days?
- Sun May 14, 2017 12:03 am
- Forum: Holden ALDL ECUs
- Topic: clearing srs airbag light in vs
- Replies: 9
- Views: 6265
Re: clearing srs airbag light in vs
ok do you know the best scan tool that clears these codes cause tech1's are very hard to find these days?
- Sat May 13, 2017 9:38 pm
- Forum: Holden ALDL ECUs
- Topic: clearing srs airbag light in vs
- Replies: 9
- Views: 6265
Re: clearing srs airbag light in vs
you will need a Tech1 or similar tool, no other way known atm. A standard ALDL cable will not work as the SRS data is on a different pin. VT and up are on the same data bus can you can clear codes with ALDL Cable. what about if i made a patch cable for my usb cord pin 9 to pin 1 in car would the co...