Hi i am after a hptuners MVPI Pro tuning cable preferably with two GM credits left or even no credits left that i can still buy credits for.
Must be a pro unit .
Text or call thanks.
0410774141
Search found 15 matches
- Fri Jun 22, 2018 5:23 pm
- Forum: Wanted
- Topic: WTB Hptuners hp tuners vcm suite Pro tuning cable
- Replies: 0
- Views: 2412
- Mon Dec 03, 2012 1:07 pm
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
Sorry mate it is a vx dash with chip on top not bottom like the vt i confused myself.
You will need a NEC mcu type programmer.
Vx clusters are a pain.
i would look for a vt s2 3 window if you can find a cheap enough one. your programmer can do those eproms.
Or find a NEC mcu type programmer.
You will need a NEC mcu type programmer.
Vx clusters are a pain.
i would look for a vt s2 3 window if you can find a cheap enough one. your programmer can do those eproms.
Or find a NEC mcu type programmer.
- Mon Dec 03, 2012 10:23 am
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
You're looking at the front of the board check the back side to see what eprom it has.
- Sat Sep 29, 2012 5:02 pm
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
I don't know what happened on that read, i read it a few times and they compared all the same.read with the right chip selected. Once i wrote the new calc to it & it was wrong i did a new calc on what i put in it & it worked perfect so i don't know what happened. I also tried some 93c56 chip...
- Sun Aug 19, 2012 12:35 am
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
If you want 0 kms.. Add 1440 to the desired value.. 1440+0 = 1440 Divide by 16... Decimal = 90, hex = 5A Minus that from 0xFFFF... 0xFFFF - 0x005A = 0xFFA5) So enter FFA5 into all 16 spots Easy as. Thanks that worked. Weird thing is i tried that calculation first, powered it up & it read 23040 ...
- Sat Aug 18, 2012 6:12 pm
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
FFFF – FA5F = 5A0 then convert to decimal 1440 multiply by 16 = 23040 & minus 1440 = 21600
- Sat Aug 18, 2012 5:55 pm
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
Ok i tried FA5F in all 16 when i powered it up it read 21600
So how did you do the calculation to get the hex value FA5F
FA5F bin attached
thanks.
So how did you do the calculation to get the hex value FA5F
FA5F bin attached
thanks.
- Sat Aug 18, 2012 3:05 pm
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
I powered them up to get the ks first then unsoldered them & read them in my programmer
changed the value to BCA3 put the chip back on then powered it up again & it read 274464 not 000000 which was what i was aiming for.
where am i going wrong?
changed the value to BCA3 put the chip back on then powered it up again & it read 274464 not 000000 which was what i was aiming for.
where am i going wrong?
- Sat Aug 18, 2012 12:29 pm
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
Can someone show me how to calculate this I started with 137235 tried to 0 the ks and ended up with 274464 this is what i did 137235+137235+1440 =255910 / 16 = 17244 hex value 435C FFFF - 435C = BCA3 Should i have taken 1000000 - 137235 = 862765 difference then added 1440 = 864205 /16 = 54012 hex va...
- Tue Aug 07, 2012 12:31 pm
- Forum: Off Topic
- Topic: VT-VX Clusters
- Replies: 221
- Views: 100294
Re: VT-VX Clusters
The attached bin is from a single vt But i have no info on it as i got it from the wreckers for parts. I have 3 triple window dashes & 1 more single that i will get reads from. Im just waiting on some sockets so i can solder them on to one of each for test setups. So was the odo location $0 up t...