Cheers holden202 it worked a treat, thanks for the help!!

I thought the netres was for limp home only, not for setting the cylinder config.
Will give it a go in the morning.
Cheers holden202

Using either v6 or 4 cylinder memcals erased and reprogrammed with v8 vp vn bins.

Well it has been a busy day, stripped the Ute down to a chassis end engine, makes every thing easier to get at. Rechecked all wiring etc. Double checked ignition timing and still no different, coughing and farting , running really rich. Did a really silly thing and plugged in an original Camira memc...

Hi
Thanks for all of the replies.
Wont get a chance to play with the ute till the weekend to check a few of your ideas.
Compression is very good ,Checked TDC on the balancer with a dial indicator when installing the cam.
The coolant sensor is the EFI sensor.
Thanks for all of your help
Cheers chocko

Hi Thanks for the replies. The reference angle was changed in the memcal. I previously used this same ecu and ignition setup when i ran dedicated LPG with older blue heads, and could get the timing set at 10degrees in diagnostic mode no probs, but for some weird reason now i have put all of the EFI ...

Hi Ref angle is set to 3.5 degrees as per Camira, dont have any datalogging at the moment. Would have thought that a standard engine with standard memcal and ECU would be a no brainer ! Do i need to have the electronic speedo connected to the ecu ? I have gone thru the wiring numerous times and all ...

Hi I have installed an injected VS 5 liter into my WB tonner but cant get it to run very well. When i try to start it its running really rich. I have tried numerous VN V8 memcals using 280 150 901 injectors with no luck. Out of desperation i tried VP V8 memcals and 280 150 706 injectors with no chan...

Hi all I have a willem programmer but am having trouble getting the offset right , i know the offset should be 0x4000 but the willem has a 6 digit read out so 4000 reads 004000 but it doesnt like 004000 when youtry to load the bin, i somehow loaded a bin that worked but have spent the day trying aga...

Now that makes sense, will be changing to petrol / injection in the near future , i think i have gone as far as i can with lpg , spent a lot of money and time ( engines dont survive too long with lots of timing and revs when your LPG system fails ) and have it running really sweet , heaps of power a...