Any luck on this?

Anyone here running boost OS with their RTLS1? If so what version boost OS? Do you mind sharing your bin so I can analyze it to try solving an issue I am having with the RTLS1 crashing.

Thank you, I feel a bit dense now lol. It will be a bit before I can test it in the PCM but it worked with the numbers I had in my excel spreadsheet.

No worries, I appreciate the help and input. Looks we may both be in TN btw. So FFFF9B2C is pin 64 on the green connector. It's setup for 5v and I was hoping to use it to monitor a fuel pressure sensor. The issue I am having is getting the math to work. The sensor I was looking at is 0psi at .5v 50 ...

I am not getting any app codes, but I have them disabled. FFFF114B I have found is the pid address. The hex address(I believe is what it's called) for pin 55 is indeed FFFFF2C0. Are you logging your wideband in RTLS1? If so is FFFF114B the address you used? My truck seems to be running without crash...

Update on getting AEM 30-0300 to work with EGR input with rtls1 and boost OS 3.4. ECM blue pin 55 for signal or positive and ECM blue pin 41 for ground or reference. For the RTLS1 settings, one either needs to change or add the following units and elements: (I havent tested this in the car but on th...

Thank you! I ended up finding that info in the universal patcher logging profiles. I was really hoping you would see this since you seem to be well versed in the RTLS1. I created an additional element for the wideband and unit on the config file. When I did, it would no longer log. It appears you ha...

I will also send Richard a message asking for the address to pin 55 EGR solenoid to see if I can add that element in the interim.

So I am close to starting my truck with the turbo fitted(hotside only). Before I had an old plx wideband 5v out wired into pin 55 for WB closed loop in boostOS, however, the wideband parameter in the RTLS1 did not appear to register the reading from the plx. I have since purchased an AEM 30-0300 wid...

Assuming you added this graph to the config files. Can you share the location of the data?