I'll give it a go , whats the worst that can happen haha

Hi everyone , I have a 304 running a haltech vms . I'm looking to change it to sequential coil on plug . I'm running an msd flying magnet trigger wheel currently through a hi6r box . I know I can use a vt distributor for cam reference , but could I remove all teeth bar one in the pre vt distributor ...

Hi everyone,
I'm changing my 4l60e in my VR SS to a turbo 350 , does anyone know of a VSS that will suit to give signal for speedo to work ?

People have run Delco for trans only, nothing to hard just some wiring. Helps keep the dash happy to. Could go the LS1 set up but you'll lose sequential injection anyway. So sequential is not an option using the Ls1 style pcm ? Is that because a vt distributor isn't compatable With the pcm for cam ...

antus wrote:If that is the case it might just be a case of removing those 2 components. Anyone want to send me a vt v8 to test with? (jokes)

You can have the one I pictured if you want , I have no use for it and has been in my collection for a long time

Hopefully they will do

Ive got a 16233396 in front of me, and theres nothing significant missing. I dont have a 16234531 to compare and I cant find any pics of the PCB. I know The1 has spent countless hours developing software for the MAF PCMs and running bench hardware so I would assume hes right. Does anyone have any p...

Regardless the pcm is only sequential up until about 2500rpm arnt they ? They then revert to batch fire from my understanding ? Not sure on that , generally there's not much difference between sequential and batch at high rpm as sequential basically has the injector open constantly and ends up acti...

Yeah I read delcowizzards response and he confirmed they were different , told ya I could be wrong

Getting your single plane ported and flow balanced by someone with a flowbench would help a lot seen major improvements by some of the 304 head gurus on Aussiev8 forum just from careful porting at the entry's in the plenum will make more power fixing the issue than bandaiding it buy trimming cylind...