Tuning a vs l67 with the1 enhanced code. I need to reduce cold start target afr but have not been able to work out which table or tables in the attached file are used to do this. Any help is greatly appreciated.

Antus you nailed it. Loaded the bin file, started immediately and flawless comms. Thankyou very much.

Ose falsh tool connected and read the bin file with no faults. Bin,xdf and adx all all from the file gareth sent and have tried before. Echo setting has been switched both ways with no difference. I will get screen shots tomorrow when i get back to work. Still does not explain why it wont run. Are y...

Will always get errors when connected but increases rapidly when cranking. Resisted plugs fitted. This a track car, so the only things in the car are a fuel pump and engine fans which are on a separate switch( not ecu controlled ). It will continuously error even with the fuel pump disconnected. Car...

Successfully connected and read bin. No issues with connection.

Tested tonight with s/c burned nvram,bin,xdf and ads to suit. No difference. I have tested with 2 different laptops, changed usb cable but only have 1 aldl device to use. Is anyone able to confirm whether they have had a scan tool be able to communicate with an nvram. I have also downloaded the bin ...

Antus I was just trying as suggested in our discussions both files for the vs v6 enhanced files form the1. Currently it has the Na tune file installed with correct bin, xdf and adx to suit. I will now flash the s/c version back in and try again.

Thanks Gareth. I know its the wrong file, we were trying things over the weekend.

Attached is a screen shot of the error count I'm looking at - getting this during and after cranking the engine. This number appears at the bottom of the screen and just keeps getting bigger until the program freezes.