Thanks gents! I'm running vintage guages so no fault lights visible for me. I'm sure there are already a heap of faults to clear currently that I probably should disable. Yes, the plan is to tune it once and never touch it again so the ultimate goal would be to have it burnt onto an eeprom. I'm so f...

My mates have picked up this one and had good success. Seems genuine sensor etc and quality unit. https://www.carmodsaustralia.com.au/x-series-wideband-uego-afr-sensor-controller-gauge.html The 0-5V output is the one you interface to the delco. Grreat, thanks for that. Do these have a narrowband si...

Just a matter of finding one now. Everyone out of stock that I've tried online.

Renders this little project a fail unless anyone has other options to help?

Hi Gents.

Any sugestions when these will be in stock or where I could locate one?

I'm stuck with a poorly running tune that needs some urgent help.

viewtopic.php?f=16&t=7649

Thanks!

Thanks for the reply. So not a straight forward changeover. I don't really want to run an external guage and been doing some more research. Would I be able to use a Bosch LSU4.2 or LSU4.9 sensor into the 808 as they are available? Any other sensors worth looking at? Another thought, could I just go ...

Wow I wish someone told me a wideband was necessary before I started all of this. Takes me half a day to pull everything out to get to the ECM. Would have done it when the car was stripped for the radiator and changed out the coolant temp sensor. Is it a direct swap the current single o2 sensor stoc...

Thanks for the fast reply’s Vlad. So there is nothing at all in the logs to explain the stalling and hesitation? I’m hesitant to make any further changes until I can get the car to shift into gear, idle and take off in traffic. Nearly got cleaned up when pulling out of a side street. The old stock E...

vlad01 wrote:Have you got a wideband hooked up?

I believe I only have a standard VP o2 sensor on the drivers side. Is this a big issue?

Now with pic:

Been out driving over the weekend and the pinging has gone so success there. Power feels about the same. I am having issues with stalling and hesitating on take off - or anytime I reapply throttle from low revs or idle. Also when changing in and out of drive/reverse. It feels like the idle is a litt...

Thanks so much guys. Don't know how I missed that step. It was even sitting in my download folder.

Working beautifully showing accurate data now. I'm going to take her on a few runs over the weekend and report back.