I reckon I have one out in the shed. My local wrecker doesnt give a shit if you cut the cable and take the connector with the sensor so I've gathered a few when collecting ABS sensors to use as triggers. Send me a PM about it.

The problem with the ELM protocol is that depending on what firmware it is, it'll only monitor for a certain amount of time, or a certain amount of messages received. Most of them wont just go in to monitoring mode and send you what it sees on the bus and keep doing it. So you need to set protocol, ...

ELM327 2.1 could be anything... I am not going to say that what you are trying to do won't work, there is every chance that it will work to some degree. But just a note to say ELMs and ELM clones and ELM alternative implementations generally do not do a very good of monitoring the bus, if at all. If...

For bluetooth get a cheap bluetooth to fm device from ebay (the cheap ones seem to be better than brand name ones from a store) and plug it in the cig lighter, or add a hidden cig lighter connector and put it all behind the dash. Then leave the stereo on the FM channel the BT module is retransmittin...

I know nothing about concentric slaves but from a bit of a google I found https://apracing.com/race-car/slave-cylinders/push-type-slave-cylinders/cp3959-family-interchangeable-with-saab-900-cylinder which looks like it might be what you want with 50mm ID option if im reading it right. And says saab ...

This stuff on can bus is not gm specific, so you probably can use the same tools. Otherwise if you know what you want you can use universal patchers logger tool and set up the filters so you get what you want and are not overwhelmed with data. Even if you want vpw data universal patcher can show you...

mytunes wrote: ↑Mon Apr 15, 2024 11:02 pm I could be wrong, but I thought some of the new virus's and such could somehow port through VM Ware?

You may be thinking of this, stay up to date and you should be OK.

https://arstechnica.com/security/2024/0 ... abilities/

Ill leave this for now because its good general advice for any software, but please support the original companies that make this software. If I change my mind or we receive complaints i'll delete the thread. This forum is a place for free tools and knowledge, not piracy.

The OP hasn't been back on the site for a while, but I am sure the information you gave is good. The only thing i'd add is your tampering with the address bus, not the data bus, so the CPU still reads data back, just it's the wrong data. Initially this causes a crash which resets the PCM and runs th...

yeah if you look at the pinouts in the pdf that comes with it you can see whats a digital and whats an analog input, and see if you can configure something to make sure the logic behind what youre using triggers a failure, turn of set cel for that error, you could. Injector voltage monitor is there,...