No Worries Mate Happy to help

If there similar price i will take 10-20

I have both GQ3x and GQ4x. The 4x is heaps simpler to use but both work the same

Willem with a psop44 adaptor http://www.darkwire.com.au ( aussie site) http://www.mcumall.com ( international but ships to aus)

No it will be fine as long as the BIN opens with efilive which it does

byteswap/invert swaps the Hi/Low buffer, depending on your burner software there is a byte swap or invert option. But that bin you have there is fine. I would be removing the flash chip again and try to read it out again just to be sure it actually did burn correctly. Make sure you clean the flash c...

A few things can go wrong but if your confident the integrity of you solder joints are correct with nobridging, lifted track on the pcb you may eliminate that Could you open the Bin file you flashed with Efilive before you wrote it? Does the car start? If not did you verify that it burnt correctly. ...

Either ask the person who locked it for the password or remove flash rewrite it then refit it. They are the 2 fastest options

Simple remove flash chip and write a unlocked bin file then refit.

Thanks Mate,

So let me get it straight is it 18 x Ref - 1 x Sync per revolution(360deg) or is 36 x ref 1 x Sync per cycle (720deg)