So I have a 165 repined to 808 and I love $12p. I have a friend who screwed up and lost the ecu for a 1993 big block chevy tbi supercharger th350 trans. Should I have him order a 165 and do the entire pinout or is there a better option?

So I've figured out most everything in $12p, but when I first start it will run good say 13.5 to 1 or whatever I tune it to. Then let's say I run into a store or whatever and come out it'll run way lean like 16-17 to 1 I've tuned it to a balance, but this leaves it running rich for the first start u...

Are you guys still around? I figured out the main issue at this point. The 5 volt reference wasn't working properly (tried it both with and without the regulator). The other issue was the dwell settings I reduced those and it kept getting better! Now I'm working on getting it to burn some what clean...

Figured I'd give an update. I went through and changed injector settings blindly and started making progress, this was with baro removed. I believe not sure that the 5v reference was and is being over taxed. I ordered up a adjustable regulator that I'm going to install so I can see the amps it's pul...

I don't think you understood the 100kpa. I was data tracing the rpm v ve v map I believe and it with the multiplication was going to 100 kpa the actual map sensor was reading 50 kpa around there. It's also going down to 10:1 so going lean when shifting into drive isn't the issue. BTW car is pretty m...

OK this is a bit weird. I got it running better cleaned plugs. Swapped the baro map for the map on the engine left baro out and it runs better, but when put into gear it still dies a few seconds after it finds its idle. I was watching the data trace on the ve map rpmas it dies and it goes all the wa...

So I turned off ve learn as far as I know. I seemed to be ale to get it slightly better. I can't get it to stop shutting itself off and now I think I have some fouled plugs. I'll take them out tonight and check them and clean/replace them after checking them. Is there anyone that can help? I'll pay ...

Sorry this was a double post.

Pretty sure I have that all set correctly. I'm grabbing 5 gallons of gas. I only had a gallon to throw in and then I'm going to see what I can find should I be using wide band ve learn?

logging dieing.xdl Please don't make fun I'm new to all this, but I'm doing my best to figure it out. I turned up the overall ve then tuned down the map ve and that seemed to help for awhile. It does seem to be way to rich at start up. I had found this bin to help me get a start. I appreciate any h...