A Conrod broke into 4 peices hole in crank, sump oil pick-up and piston still in cylinder and dropped all coolant.
Was a good effort.
Thanks for advice.
Search found 14 matches
- Thu Nov 09, 2023 10:24 am
- Forum: Engine/Transmision Mechanical
- Topic: 304 non roller into vt
- Replies: 3
- Views: 6248
- Tue Nov 07, 2023 8:51 am
- Forum: Engine/Transmision Mechanical
- Topic: 304 non roller into vt
- Replies: 3
- Views: 6248
304 non roller into vt
Hey guys
I've taken out the 304 from my vt which has seen its end.
Wondering if I swap out the dizzy onto a non roller motor will I be able to run the motor in my vt?
I've taken out the 304 from my vt which has seen its end.
Wondering if I swap out the dizzy onto a non roller motor will I be able to run the motor in my vt?
- Mon Sep 18, 2023 9:41 am
- Forum: Engine/Transmision Mechanical
- Topic: Vt 5l no spark
- Replies: 4
- Views: 2995
Re: Vt 5l no spark
Thanks guys for all the help.
Was the ignition module in the end.
Was the ignition module in the end.
- Tue Aug 29, 2023 9:48 pm
- Forum: Engine/Transmision Mechanical
- Topic: Vt 5l no spark
- Replies: 4
- Views: 2995
Vt 5l no spark
Vt 5l no spark.
Getting injector pulse.
Replaced coil 12v to coil.
Only just put the motor back in everything was running fine prior.
Ignition fuse popping randomly sometimes.
Ignition module only 6 months old but feels very hot.
Getting injector pulse.
Replaced coil 12v to coil.
Only just put the motor back in everything was running fine prior.
Ignition fuse popping randomly sometimes.
Ignition module only 6 months old but feels very hot.
- Fri May 12, 2023 7:28 pm
- Forum: Engine/Transmision Mechanical
- Topic: Oil on plug 304 v8
- Replies: 3
- Views: 3298
Oil on plug 304 v8
Hi I have smoke coming from spark plug hole when running I pull the plug and it has oil on it.
Done a compression test and it is running at 115 psi as are all the others.
Wondering where the oil is coming from.
Thanks Alex
Done a compression test and it is running at 115 psi as are all the others.
Wondering where the oil is coming from.
Thanks Alex
- Thu Mar 16, 2023 1:01 pm
- Forum: Wiring
- Topic: Where to connect boost line vt 5l
- Replies: 1
- Views: 949
Where to connect boost line vt 5l
Hi guys wondering where I can hookup boost gauge pipe on a vt 5l ?
Thanks Alex
Thanks Alex
- Tue Mar 14, 2023 6:01 pm
- Forum: General Tuning Discussion
- Topic: Vt 5l shorted out.
- Replies: 3
- Views: 2332
Re: Vt 5l shorted out.
Thanks for the help guys.
Had a loose earth lead and had done the starter relay.
No more shorting.
Car cranks and runs as it should.
Alex.
Had a loose earth lead and had done the starter relay.
No more shorting.
Car cranks and runs as it should.
Alex.
- Sun Mar 12, 2023 7:24 pm
- Forum: General Tuning Discussion
- Topic: Vt 5l shorted out.
- Replies: 3
- Views: 2332
Vt 5l shorted out.
Hi I had my vt 5l running. I went to start after 2 weeks. My oil return pipe from the turbo started to glow in one spot on the side of the wastegate whilst cranking engine. Since I have not been able to start the car. Starter wont turn over. Fuel pump was stuck on. Now won't even turn on. After any ...
- Sat Nov 26, 2022 8:27 pm
- Forum: Wiring
- Topic: Vt 5l injector pulse.
- Replies: 11
- Views: 3315
Re: Vt 5l injector pulse.
Hey guys tested injectors with battery they're clicking.
Possible hall sensor or ignition module?
Hooked up to tunerpro dtc 47 appearing.
Thanks Alex
Possible hall sensor or ignition module?
Hooked up to tunerpro dtc 47 appearing.
Thanks Alex
- Thu Nov 10, 2022 4:35 pm
- Forum: Wiring
- Topic: Vt 5l injector pulse.
- Replies: 11
- Views: 3315
Re: Vt 5l injector pulse.
Hey Charles no I haven't I will give that a try.