Search found 34 matches
- Fri Jul 28, 2023 10:26 am
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: Knock sensor swap
- Replies: 21
- Views: 3616
Re: Knock sensor swap
Hi Antus, I suppose this could be the case, spose I will find out how well they work if I can get something out of them. Haha As I'm planning on testing them with a 1uz on a P59. hahaha As v8fan says above about the PCM deciding what to listen to, there does appear to be a knock sensor frequency tab...
- Thu Jul 27, 2023 2:48 am
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: Knock sensor swap
- Replies: 21
- Views: 3616
Re: Knock sensor swap
From what I could dig up, I believe that a 2002 Chevy S10 - 4.3 v6 runs the Flat response style sensors. The S10 I believe utilized the 0411 PCM. What I do know is they run a different part number between the S10 flat response sensor and the later Ls2 style sensors with a different plug. However I a...
- Fri May 05, 2023 12:16 pm
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: "flat response" knock sensors
- Replies: 39
- Views: 15103
Re: "flat response" knock sensors
NSFW, or others?
I know this may be a little bit of a thread dig, and potentially has been resolved.
But out of curiosity was this ever confirmed working or did it fall through the cracks as a still to do?
I know this may be a little bit of a thread dig, and potentially has been resolved.
But out of curiosity was this ever confirmed working or did it fall through the cracks as a still to do?
- Mon May 01, 2023 7:14 pm
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: LS1 Boost OS V3
- Replies: 20
- Views: 29091
Re: LS1 Boost OS V3
Hey Bubba, Firstly awesome work with this as a whole!! I'm sure it has been some late nights! But certainly looks promising. :) Might need to hunt down a P59 pcm here in Aus or get one from the states! Any suggestions on best place to source? Or just ebay? This looks like it should suit a few projec...
- Sun Jul 22, 2018 9:10 pm
- Forum: ALDL, OBDII Logging and Scanning
- Topic: Bench Setup
- Replies: 11
- Views: 14610
Re: Bench Setup
Oldn64, well it does work :) I don't have a vy/vz or a bcm from one. As its for a project. Just wired the obd2 interface directly to the data line and pos/neg to the required areas and am able to communicate/change things on the cluster! Yeah know the feeling.. always distractions! :( Feel free to s...
- Tue Jul 10, 2018 10:34 pm
- Forum: ALDL, OBDII Logging and Scanning
- Topic: Bench Setup
- Replies: 11
- Views: 14610
Re: Bench Setup
I have successfully programmed a vy/vz cluster without the need for a bcm and wired up as you suggested. Also if you want to cycle through screens you will need the trip computer button wired in, or a series of resistors that represent each of the buttons. Personally I found it easy with just a tail...
- Fri Aug 12, 2016 1:57 pm
- Forum: Delco ECU Conversions
- Topic: Speedo sender for Trimatic
- Replies: 24
- Views: 27479
Re: Speedo sender for Trimatic
If you want to order one, when you contact them (Mark) just say that your after the a "trimatic Speedo cable adapter", or something to that affect.
Mark, seems to have a lot of other products that aren't listed in the catalog, best bet is shoot him and email or give him a call.
Mark, seems to have a lot of other products that aren't listed in the catalog, best bet is shoot him and email or give him a call.
- Thu Aug 11, 2016 12:31 pm
- Forum: Delco ECU Conversions
- Topic: Speedo sender for Trimatic
- Replies: 24
- Views: 27479
Re: Speedo sender for Trimatic
I know this is a thread dig..
But i thought i'd everyone know these trimatic speedo adapter are available from:
Contact: Mark : Phone: 0438 407 779. PO Box 1199, Lavington NSW 2641
http://www.alburyspeedo.com.au/
But i thought i'd everyone know these trimatic speedo adapter are available from:
Contact: Mark : Phone: 0438 407 779. PO Box 1199, Lavington NSW 2641
http://www.alburyspeedo.com.au/
- Fri Mar 13, 2015 11:04 am
- Forum: Delco ECU Conversions
- Topic: Speedo sender for Trimatic
- Replies: 24
- Views: 27479
Re: Speedo sender for Trimatic
I did a 202 trimatic efi conversion recently and ended up buying one of these. pulled the plastic gear off the trimatic cable and pushed that on to the adapter. Then it slides straight into the speedo sensor and uses the existing trimatic cable holder. 20140224_143602.jpg then used just an adapter w...
- Sun Mar 30, 2014 10:23 pm
- Forum: Members Rides
- Topic: CF Bedford Van
- Replies: 605
- Views: 259692
Re: Bedford CF Van
Ahh very good on the progress! the engine crane certainly helps! but I do love the stool on wheels at the back for the trans! guessing you didn't have another trolley jack? as for the crewman diffs, the initial research I did into them for a project I was going to use them for indicates a lot of the...