I'm using an ALDL cable purchased from here a long time ago. Might have to put together a MAX232 cable, there's a post here stating that's all they could get working: https://pcmhacking.net/forums/viewtopic.php?p=94147#p94147 have you tried to do read of the general cluster info? "File > Get In...

Rhysk94 wrote: ↑Tue Apr 09, 2024 11:36 pm it keeps saying requested baud 8192 , achieved baud 0.

I've got the same problem.

I've edited the config file to select the com port - but still get this error.

Did you ever find a solution?

Originally the BCM / ECC module would signal the PIM via ALDL the AC Request. Not sure how it works after the PIM, but I would assume it just passes that information on via VPW - there wouldn't be a separate wire for AC request. Red 18 is the feedback to PCM to show the clutch is engaged. Haven't go...

Hey guys,

Is it possible to disable DTC's / engine light for certain trouble codes on the VX / VY flash based PCM's, similar to the earlier memcal PCM's?

I cant find an XDF with any trouble code definitions for any trouble codes on any of these flash PCM's at all.

Thanks in advance

For the correct chip ID:
Factory short 1024k memcals can be read as Fairchild FM27C010.
Long 512k memcals as ST M27C512.

Or skip the ID mismatch and it should still work as most 27C010

Hey guys, I seen this pop up and thought someone on here might ne interested. It's a Vane 9400 dyno - free, buyer to remove, need gone ASAP. Located Melbourne. I don't know much about dynos but I think it's a steady state eddy current type. I may be wrong. https://www.facebook.com/marketplace/item/1...

I ended up searching around and think I've found the file your talking about:

viewtopic.php?p=56041#p56041

Looks to be exactly what I need.
Thanks

Hey guys, Has anyone successfully used $11P on a 424 with a manual transmission? I'm trying to help someone out who is doing a 5L conversion in a manual patrol. I know the best option is probably $12P and a '808, but they already have the '424 and would prefer to just use that if possible. Is it jus...

Is it the name of the table that's wrong, or the bubble that's wrong?

I guess the bubble is defined by the XDF somehow.

If the name is right but bubble is wrong it might send you down the wrong path.

Hey guys, I'm wondering how interchangeable AU Falcon EECV PCM's are. Can I flash any file onto any PCM? EG. Turn a 6cyl PCM into a V8? Or a Intech into a VCT? Or a series 1 into a series 2? etc etc. I've got a couple of them here and I opened them up out of curiosity. One is from a 6cyl intech auto...