This is what I use on a L67 with 2 bar Map sensor. X * 0.7844 + 11.0 Thanks, Ill give that a try, I also got this from an earlier thread for PSI conversion The easiest option (and the best for the least rounding error) is what Jayme suggested. If you want to simplify it the calc is... 2 Bar = (X * ...

Looks like for the most part, the "$51 VS V6 Engine and Trans v1.11 WB Innovate" ADX works with W45 :) Looking at the ADX, it looks like someone has already added 'MAP for KAL' value, but it seems to be reading just over 50kpa at atmosphere pressure? Not sure if its been configured for a 2...

Hi Guys, Hoping someone here help me out, does anyone have a list of ABS/BCM DTC's for a '95 VS commodore? It seems the latest VS V6 ADX file that is updated in this thread http://pcmhacking.net/forums/viewtopic.php?f=10&t=29 only has the send command to clear the DTC's defined, but not what the...

ejukated wrote:DTC function is same as factory except you will have MAP related DTCs

Good to know, thanks ejukated

There is a W40 ADX here .. http://pcmhacking.net/forums/viewtopic.php?f=10&t=29 I think the data stream for W45 might be similar, just with some MAP related things added (the W55 ADX is almost identical to stock), but you should be able to setup an ADX to log it fairly easily. Thanks VL, ill ce...

To add, I believe it will be tuned on the W45 code

Hoping someone can shed some light on this, I have a VS V6 that's had an L67 conversion. The car is going in for a Kalmaker MAP tune this week, and I'm assuming that i will longer be able to datalog through TunerPro as i currently do? Will i even be able to view DTC's and/or clear them? And i guess ...

Hi, Just new on here doing some research on my pcm when i get this motor running after rebuild. Setup is as follows : VS Wagon L67 T5 manual Ecotec engine harness and PCM which i reprogrammed with an L67 tune It was running ok like this but had all the symptoms of no VSS signal, Ive checked the boar...