does anyone have a copy? im looking for the peculiar parts article in this edition.
much appreciated.
Search found 98 matches
- Sat Nov 05, 2022 11:48 am
- Forum: Other Tuning
- Topic: Elektor mayjune 2019
- Replies: 0
- Views: 3954
- Fri Nov 04, 2022 8:26 am
- Forum: Hardware
- Topic: titania o2 sensor 5v
- Replies: 1
- Views: 3274
Re: titania o2 sensor 5v
"A titania lambda sensor works like a coolant sensor. It changes resistance as the air/fuel ratio goes from rich to lean; but instead of a gradual change, it switches very quickly from low resistance (less than 1000 ohms) when the mixture is rich to high resistance (over 20,000 ohms) when the m...
- Thu Nov 03, 2022 6:34 pm
- Forum: Hardware
- Topic: titania o2 sensor 5v
- Replies: 1
- Views: 3274
titania o2 sensor 5v
So what mA does the typical ecu feed a titania o2 sensor operating in the 5v range ?
- Sun Oct 23, 2022 12:19 pm
- Forum: Hardware/Bin Feature suggestions
- Topic: O2 sensor on spark only bin *with* IAC as lean valve
- Replies: 5
- Views: 11198
Re: O2 sensor on spark only bin *with* IAC as lean valve
The yank stuff was for catalytic convertor equipped carb cars cause a convertor needs the fueling to swing rich then lean then rich like closed loop fueling to feed the convertor enough oxygen to burn the bad stuff some had an air inlet on the convertor as well to feed in fresh air to burn Yes that...
- Thu Oct 20, 2022 2:25 pm
- Forum: Delco ECU Conversions
- Topic: ideas' suggestions 12p to run a minuki FBC on an astron 2.6
- Replies: 1
- Views: 4152
Re: ideas' suggestions 12p to run a minuki FBC on an astron
My Thoughts run like thds: IF the maths tfrom other inputs, and calcutations... eg both temp sensors and calculations such as BLM are all added and subtractex together anb fxnally applied to the BPW, at that moment i could JSR to a routine that recalculates and applies to a spare output to vary the ...
- Wed Oct 19, 2022 11:28 pm
- Forum: Delco ECU Conversions
- Topic: ideas' suggestions 12p to run a minuki FBC on an astron 2.6
- Replies: 1
- Views: 4152
ideas' suggestions 12p to run a minuki FBC on an astron 2.6
***late nite inspiration*** might need to clean this up in the morning So, not being satisfied with the norm, Ive been wanting to do this for a while, Im about to push the button on a minuki feedback carby, they came out in american astrons et al, they did have an ecu run them. the FBC simply replac...
- Sun Jul 11, 2021 1:19 pm
- Forum: Other Tuning
- Topic: Do you want to see some 1960's toyota gearbox controller?
- Replies: 1
- Views: 4287
Do you want to see some 1960's toyota gearbox controller?
Off a 67ish Toyota Crown. It controls the 3speed overdrive manual GB.
https://app.box.com/s/34mdz16gse2ed7jb4vnaa7kfmjz05ejw
https://app.box.com/s/pf5p6rpjmdb2su8nwi9xgdix71b9b3ck
https://app.box.com/s/ehlodw2llbi4xi5niq8be3tz9ca2hmcm
https://app.box.com/s/34mdz16gse2ed7jb4vnaa7kfmjz05ejw
https://app.box.com/s/pf5p6rpjmdb2su8nwi9xgdix71b9b3ck
https://app.box.com/s/ehlodw2llbi4xi5niq8be3tz9ca2hmcm
- Thu Mar 19, 2020 10:12 am
- Forum: Hardware
- Topic: Chrysler ELB pr0n
- Replies: 1
- Views: 3861
Re: Chrysler ELB pr0n
Or so I've been told, yet I see No 1802, and that crystal means the chips are running at 500hz , I thinkPowered by the rca1802.
- Tue Mar 17, 2020 5:37 pm
- Forum: Hardware
- Topic: Chrysler ELB pr0n
- Replies: 1
- Views: 3861
- Sun Mar 08, 2020 7:55 pm
- Forum: Hardware
- Topic: how LHM EXACTLY works ?
- Replies: 1
- Views: 4366
how LHM EXACTLY works ?
Is anyone able to point me to an explanation on an EE level of how the Delco operates in lhm (with the programming of the resnet in the memcal ) electrically please?
Yes, I understand it kicks in when the MCU is dead...
And yes I understand 'its the resnet'
Thanks.
Yes, I understand it kicks in when the MCU is dead...
And yes I understand 'its the resnet'
Thanks.