Search found 98 matches

by barana
Sat Nov 05, 2022 11:48 am
Forum: Other Tuning
Topic: Elektor mayjune 2019
Replies: 0
Views: 3963

Elektor mayjune 2019

does anyone have a copy? im looking for the peculiar parts article in this edition.
much appreciated.
by barana
Fri Nov 04, 2022 8:26 am
Forum: Hardware
Topic: titania o2 sensor 5v
Replies: 1
Views: 3276

Re: titania o2 sensor 5v

"A titania lambda sensor works like a coolant sensor. It changes resistance as the air/fuel ratio goes from rich to lean; but instead of a gradual change, it switches very quickly from low resistance (less than 1000 ohms) when the mixture is rich to high resistance (over 20,000 ohms) when the m...
by barana
Thu Nov 03, 2022 6:34 pm
Forum: Hardware
Topic: titania o2 sensor 5v
Replies: 1
Views: 3276

titania o2 sensor 5v

So what mA does the typical ecu feed a titania o2 sensor operating in the 5v range ?
by barana
Sun Oct 23, 2022 12:19 pm
Forum: Hardware/Bin Feature suggestions
Topic: O2 sensor on spark only bin *with* IAC as lean valve
Replies: 5
Views: 11200

Re: O2 sensor on spark only bin *with* IAC as lean valve

The yank stuff was for catalytic convertor equipped carb cars cause a convertor needs the fueling to swing rich then lean then rich like closed loop fueling to feed the convertor enough oxygen to burn the bad stuff some had an air inlet on the convertor as well to feed in fresh air to burn Yes that...
by barana
Thu Oct 20, 2022 2:25 pm
Forum: Delco ECU Conversions
Topic: ideas' suggestions 12p to run a minuki FBC on an astron 2.6
Replies: 1
Views: 4157

Re: ideas' suggestions 12p to run a minuki FBC on an astron

My Thoughts run like thds: IF the maths tfrom other inputs, and calcutations... eg both temp sensors and calculations such as BLM are all added and subtractex together anb fxnally applied to the BPW, at that moment i could JSR to a routine that recalculates and applies to a spare output to vary the ...
by barana
Wed Oct 19, 2022 11:28 pm
Forum: Delco ECU Conversions
Topic: ideas' suggestions 12p to run a minuki FBC on an astron 2.6
Replies: 1
Views: 4157

ideas' suggestions 12p to run a minuki FBC on an astron 2.6

***late nite inspiration*** might need to clean this up in the morning So, not being satisfied with the norm, Ive been wanting to do this for a while, Im about to push the button on a minuki feedback carby, they came out in american astrons et al, they did have an ecu run them. the FBC simply replac...
by barana
Thu Mar 19, 2020 10:12 am
Forum: Hardware
Topic: Chrysler ELB pr0n
Replies: 1
Views: 3861

Re: Chrysler ELB pr0n

Powered by the rca1802.
Or so I've been told, yet I see No 1802, and that crystal means the chips are running at 500hz , I think
by barana
Sun Mar 08, 2020 7:55 pm
Forum: Hardware
Topic: how LHM EXACTLY works ?
Replies: 1
Views: 4367

how LHM EXACTLY works ?

Is anyone able to point me to an explanation on an EE level of how the Delco operates in lhm (with the programming of the resnet in the memcal ) electrically please?
Yes, I understand it kicks in when the MCU is dead...
And yes I understand 'its the resnet'
Thanks.