Search found 293 matches
- Sun Apr 28, 2024 8:46 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
It wasn`t that hard once you know the pattern. Found there is 2 main revisions of t43 code, not sure how to differentiate unless open in patcher, early style is labelled t43-0 later style t43 that was quick. lol. is there documentation for universal patcher that explains how to add new tableseek da...
- Sun Apr 28, 2024 7:27 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
Did some changes to e38 tableseek file, and now it will find the TX and RX tables stored in OS for any e38 e67 bin. End of table is open, so user needs to figure where it ends, Usage will be for display mainly. Extract file to XML folder overwriting previous versions. Nice, any chance of adding in ...
- Sun Apr 28, 2024 2:31 am
- Forum: Bosch ECUs
- Topic: GM Can info & knowledge share
- Replies: 1
- Views: 70
GM Can info & knowledge share
Couldn't think of a decent subject title, but there is obviously a lot of smart people around here so if people are happy to share knowledge it might help out others in building up some skills. I know im no guru, but sometimes i'll be working on something for a bit & some1 drops a bit of info an...
- Fri Apr 26, 2024 7:21 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
That is an interesting piece. Not a complete body control module, however it has 2 pair of canbus wires. GM had a tendency to do that with a few modules like the TCM's. Basically they were just daisy chaining some the nodes together to save wiring. However for that PIM module, I would like to see w...
- Fri Apr 26, 2024 2:07 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
the vz 6lt was a special car, only produced for like 6-9 months because from jan 1 to september (slight production overlap with VE) they introduced euro 3 or 4 emissions at the start of the year & i suspect because holden had already worked all that shit out for the upcoming VE model, they used ...
- Fri Apr 26, 2024 12:58 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
Couple of logs from a Holden VZ, this was a 6 month model run back in 2006 prior to the release of the VE model (later exported as the g8 in 2009). They had E38/T42,ABS,PIM module on the canbus. 1 log is key on, engine off. 2nd log is engine running & me moving the shifter through P,R,N,D etc (n...
- Thu Apr 25, 2024 11:47 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
Bump these off that list. :D 0x0F9 Trans_General_Status_1 0x199 Trans_Torque_Request_HS 0x1F5 Trans_General_Status_2 0x4C9 Trans_General_Status_3 Have any good CANbus captures off a Holden car? no can captures directly, obv i have tons of efilive logging. I do have a can capture device i can use th...
- Thu Apr 25, 2024 10:46 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
Kur4bo, i used the address u posted to look at the 9099 os, used that as a bases to find it in the newer one. Interestlying i found that there is a double up in the ecu code! "Normal RX MSG" "0C1,0C5,0F1,0F9,128,130,131,140,199,19D,1C7,1C8,1C9,1CB,1E1,1E9,1EB,1F1,1F5,1F9,280,299,2C9,2...
- Thu Apr 25, 2024 10:11 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
For anyone wondering how Cal data is defined per node, there is a table in OS that defines it, similar to DTC list logic. second dword per node defines???length ??size and some other ??data. There are also 4 tables 2 for TX and 2 for RX that defines subroutine addresses for execution per node. It r...
- Thu Apr 25, 2024 5:48 pm
- Forum: Bosch ECUs
- Topic: E67 to T87/T87A TCM interface needed
- Replies: 63
- Views: 11454
Re: E67 to T87/T87A TCM interface needed
got that 1 from u already. I've got the main 8762,8772 ones now.
the place we got our last ones from no longer do a pdf download, but i got another site, which to be honest looks like it's just some1 charging for them but not an actual authorized place.