Ok so thought i would drop some new pictures of what’s been done. A bit of manual work with the grinder and files ( I am going to try and get the CAD files edited so there is less manual work with the crank sensor bracket). no paint.jpeg bracketpaint.jpeg brackandac.jpeg Bracket hiding behind A/C mo...

Thanks for the tip boys ...

Yeah that's what i thought. same picture bar the logo. just hate to pay double for the same part. But You know the old saying the poor man pays twice....

Hi all, Does anyone have any good things to say about raceworks or generic fuel pressure reg? E85 compat . These 2 look identical except for the raceworks decal. and allmost double the price. So what do you guys think? https://www.ebay.com.au/itm/134300007143?_trkparms=amclksrc%3DITM%26aid%3D1110013...

Well done mate, I just found your post after I PM you..

For a 6 Cylinder with firing order 153624 this should be how you connect the coils to leads, then the only thing left will be the crank trigger being in the right spot! 2024-06-12_11-58-37.png Yeah mate this is the config that i have had it running. But Antus tells me that coil pattern and and sens...

Are you saying that this picture of the jackaroo coil pack with its firing order 123456 and its BCA coil pattern is wrong?....After reading previous post I think that's what you saying. I wont be doing a how to untill i know myself exactly how it works. base timing,idle,everything. I have not seen a...

Thanks for your reply, I will do some reading and have another look at it... Ok thanks again everyone for there advice and time. I have my engine running now just for a short time but I am on the right track now. I think the main thing was the coil from plugs 3+4 was not working I was chasing my tai...

Also looking at the motec page above shows a picture of the sensor at what i would say is 0deg tdc. and sync at 10deg is ATDC not BTDC.

My wheel is setup to be 10deg ATDC like the above picture .

So had to work today, thinking about whats wrong with this thing.... Got home pulled the plugs, tried to get timing light to work but its not interested. Took leads off and put a wire across the terminals so i could see spark. found that turning over by hand does not get good results. so cranked it ...