Hi Antus, where did you get your parts cut out ? how much ?

Ok I have everything hooked up and connected . Tried for a engine start and was no good ;-( . Back to checking the basics its got air and fuel (injectors are firing) but only has spark on 1 coil out of the 3 . This is a vn s1 coil pack with the 3 coils moulded into one unit. I am sure that the dfi m...

Looking at the 3d printed part and paper part pictures the edges of the 3x look to line up with the edges of the 18x? Doesn't the 3x sync work by counting the 18x transitions during a 3x sync pulse? There for the edges should be offset? EG. The 3d printed one, the largest 3x slot has 2x 18x transit...

So I found someone to 3d print out my disc , came out pretty good (for a test anyway) .painted black to stop any light getting through. on my bench setup found it to run better but still not perfect. Going to try it on my engine asap and see what happens . IMG_1434.jpeg A couple of things i found ou...

Ok , So did a couple of tests with my first disc - clean PW signal from 35ms down to 4ms with disc high to lo 30 deg (camshaft) IMG_1331.jpeg slow.jpg fast.jpg And a smallest PW of 1.ms with disc with a 5deg hole, Signal looks good. IMG_1332.jpeg fast 3.jpg The est bypass does the same thing with bo...

It sounds like its loosing sync. Can you have a look at the REF signal on a scope and see if its clean? Yes i will look into that. Also also have questions about distributor ref signal , output from the camera type module. Does my signal need any conditioning before the ecm. As i am running the rb3...

So Ive been playing around with things, Have a problem with EST bypass signal from ecm to ignition module. But i don’t know if it's a problem that I have made or my setup. Having a go at a single coil with dizzy ignition. So I have a disc with 6 holes in it . With my bench setup I have it running un...

So nothing done with my project ;-( . Lack of time and funds has me stuck. I retrieved my cad file with the disc (will post for any one else who wants to give it a crack.) .
rename disc.ems

So I have had a bit of a set back, Lost all my info and cad drawing etc that i had for my project. Laptop meltdown(windows) could not recover anything.... I have swaped over to the dark side ( Macbook ) tell you something it does what you tell it to do . Going to look for a free cad program that i c...

charlay86 wrote:Most laser cutting places have a minimum order price around $200,.

yes mate that's what i have found ..