So, I've been playing around with this. One thing I'm not sure about is the factory tune info doesn't seem to match any of the tyre calculators I've tried. All the tyre dimension sites I've looked at seem to all give the same data, but none of them match what I have in any of the ECU's with factory ...

When you say motor doesn’t matter, the L77 has DoD, is this an option in the VZ OS? I have heard about people saying they can enable the 6l80 in the VZ OS but i haven’t physically seen in done or seen specific info about it yet. That would obviously be a lot easier. The PIM I’m guessing is looking f...

Thanks for the link, had a bit of a read, very interesting. I don’t know if I can go down that path with the L77, as I don’t think it was a factory option for VZ, I don’t know if the VZ OS will have the settings for it. I did try all sorts of settings originally on my PIM, nothing made the cluster s...

Hey mate, yes, version 2 is going to be sent to me shortly, this one should make it appear ‘factory’ with all original functionality. At the moment the only issues I have is no gear selection on cluster (which also results in no reverse lights) and SVS alert (SES alerts on HP tuners), these have hop...

yeah i meant seperate read from the controllers. hpt does some wierd shit were options disappear/get added when they are a combined read. tends to happen in the speedo area since both the trans & ecu have similar table settings. My experience with auto combo's is get the speedo working correctl...

I picked myself up a rough VZ SS (6lt/t42) a couple of weeks ago, so when time permits I'll do the 6l conversion. I believe i can do it just by modifying\redoing the harness since i've done some comparison between the early 06 ve manual/auto & vz e38 tunes & can see whats different in the r...

Sorry, that was silly of me to leave that out, yes running the 6l80. Do you mean take a read of the E38 on its own without the TCM? I’ve got a read of the E38 on its own, E38 with TCM and another one with E38,TCM & FPCM. I’ve just had a look and all of them look the same on the speedometer page ...

Hi all, This may be a silly question, however I was wondering if it's possible to modify the no of pulses that the E38 sends out on X1-57? I have fitted a VF ECU to a VZ the ECU details are Main OS 12656930 System 92271525 Speedometer 92271528 Now that I have set the diff and tyre ratio correctly in...

ok so I've got all the info I wanted now. -BCM Code -Radio Pin -Ign Key No. -Security code (which I got from the PIM) So if I read it in circuit on the board, even though the I2C has on it ATMEL 04B, I get nothing reading it as an 04B, if I read it as 08B, it's blank all the way to 1F0 and I start r...

Thanks, I've seen that thread, however I wanted to get all the data from the BCM. The device has 04B on it, which in XG Pro always returns FF, but if I select 08B I get data from 200 to 300. It's very consistent with the data it returns, I try changing device ID while set to 08B and it doesn't seem ...