I have adjusted the Ve table using the 276 log file the next file is with the Ve updated...my main issues are hunting when cold and hunting when warm 20 steps 50 steps no difference. Underload seems to be ok but in 2nd gear doing 60 and planting your foot causes pinging again.. and when you get home...

Nah I had converted the VP stock clubby tune to 12P and used my old 808 VN ecu to run the modded BDJH tune

Thanks Dylan, No rush took it for a drive today and took some logs...interesting thing towards the end of the drive I uploaded a stock VP clubby tune to 12P and the idle improvement apart from hunting with ac on and it pinged less...so I edited the AFrs for 90 and 100 to 11.50 and 11.00 and the ping...

I'm using nvram, mods are 276 cam, VT v6 injectors, stock banana manifold with front facing ls1 throttle body, 3 inch twin system into 3 inch single exhaust. Strange thing is it doesn't ping with the modded VP tune. I copied as much over as I could. Cold start hunts, hunts when warm although it stab...

Attached the tunes it was BDJH VP clubby tune to $12p. Knock stuff was disabled. It hunts at idle and pings under load...the VP tune runs great but want to fine tune it using the 12p stuff. You currently get out of the car smelling like fumes lol

Hello Guys,

I have copied a BDJH VP modded clubby tune 5L tune to 12P and having strange issues with pinging under load/accelerator flat to the floor

I have copied everything over to the 12P tune, not sure what I'm doing wrong


cheers!

Ok timed to 10deg in diag mode with 10deg reference angle.
So strange the non os12 normal memcal with same tune won't run but at 10 but 80 it runs....what ever I'm back on track now and it starts and idled nicely....back to reading and tuning. I will capture another log and post back. Thanks guys

Ok changed the reference angle and it runs ok, need to get a new timing light as it died today lol.....really strange I put in my non nvram memcal and it struggles to run on reference angle 10...same tune on nvram with reference angle 10 is running perfect so far :? i purchased a new timing light to...

ok i will look into. prior to the mods I setup reference angle to 10 and had issues trying to time it similar to holden 202...then i found his thread and changed to ref angle to 80 and was able to time it 10 deg before TDC and it ran fine...I will try and set it to 10 again. 'delivering X spark, you...

Hey Guys can someone review my current tune....installed a new wideband. idle afr seems way off It was hunting so made the idle rich... also having a strange issue when I let off the throttle it pops once from the exhaust and the afrs are bouncing all over the place :(..... if someone can tweak it e...