L67PSI
Thanks for the offer to reprogram the PCM however I have accepted help from one of the other guys and thank you to everyone who has offered to assist.

Cheers
GB

Thanks for the replies guys - VL400 please check your PM

Graham

OZ38
The PCM is from the donor VY Commodore
Graham

Hi Guys I require a chip for a VY V6 motor that will be fitted to a boat. The PCM code on the cover is DSZT and VATS will need to be removed and the owner wants to run it without oxygen sensors if possible due to the custom exhaust manifold going into the water If someone in Perth can assist it will...

The attached file is what I finally settled on. Had to richen up the lower end and lean out the higher revs and add a degree of timing and it runs well.

Thanks for helping with my questions fellas.

Cheers
GB

Gents
Thanks for getting me started on tuning the Inter and my next question is how do I attach the finished bin file to post on this site?

Thanks
GB

HQ355, I haven't filled the tank yet and am yet to find out what its capacity is, however I calculated it to hold 72.43 litres when I built it.

Some more pics

Thanks Dazza, I am running a stroked VS 5 litre with a 4L60e tranny, electric one piece windows, Dakota Digital gauges, Flaming River Steering column, Grant Steering wheel, shaved door handles, XJ6 Jag front and rear suspension, Gemini booster and XB Falcon M/C. I have had to make a heap of custom b...

This is my ride that I have been building for the last 7 years