Search found 6 matches
- Sat May 30, 2015 4:34 pm
- Forum: For Sale
- Topic: FS: ECM EEPROM/Flash Memcal (VN to VS but not VS Ecotec)
- Replies: 20
- Views: 20589
Re: FS: ECM EEPROM/Flash Memcal (VN to VS but not VS Ecotec)
So does this mean that a chip burner would still be needed to reprogram?
- Sun Jul 06, 2014 3:57 pm
- Forum: General Tuning Discussion
- Topic: Cant connect engine running
- Replies: 10
- Views: 5744
Re: Cant connect engine running
Update: changed to resistor type spark plugs and can now connect ok.
Must have been picking up hv interference. The ecu is mounted to firewall inside the cab but is quite close to number 8 cyl spark plug.
Must have been picking up hv interference. The ecu is mounted to firewall inside the cab but is quite close to number 8 cyl spark plug.
- Tue Jan 21, 2014 11:36 am
- Forum: General Tuning Discussion
- Topic: Cant connect engine running
- Replies: 10
- Views: 5744
Re: Cant connect engine running
Yeah it worked fine running when it was sitting on the floor but since mounting it to the firewall it connects ok ignition on but not when engine is running. My first thought was interference from plug leads as they run very close to where the ecu is mounted albiet on the other side. The leads are a...
- Sat Jan 18, 2014 9:41 pm
- Forum: General Tuning Discussion
- Topic: Cant connect engine running
- Replies: 10
- Views: 5744
Re: Cant connect engine running
Ok I set the speed to 60km/h and the fan is now turning on thanks.
Still gota get to the bottom off the connection issue tho. I wonder if a power filter like for a stereo would work?
Still gota get to the bottom off the connection issue tho. I wonder if a power filter like for a stereo would work?
- Wed Jan 15, 2014 11:10 pm
- Forum: General Tuning Discussion
- Topic: Cant connect engine running
- Replies: 10
- Views: 5744
Re: Cant connect engine running
Ah that may be the problem as I dont remember loading an adx file, how do I do that?
Yes I set road speed to zero cause I dont have a speed sensor, is that whats screwing it up?
I might have to run ecu off a ign trigered relay to ensure a clean power source.
Thanks for suggestions.
Yes I set road speed to zero cause I dont have a speed sensor, is that whats screwing it up?
I might have to run ecu off a ign trigered relay to ensure a clean power source.
Thanks for suggestions.
- Wed Jan 15, 2014 5:00 pm
- Forum: General Tuning Discussion
- Topic: Cant connect engine running
- Replies: 10
- Views: 5744
Cant connect engine running
Hi guys, Im experiencing a strange problem. I can connect to tuner pro rt fine with ignition on and upload download etc but cannot connect with engine running. Strange thing is it worked fine with ecu sitting on passengers floor. I have mounted ecu to firewall on passenger side under the dash. This ...