Search found 20 matches
- Mon Jun 19, 2017 3:12 am
- Forum: Custom Code
- Topic: Northstar 7165 OBD1 Bin creation and tuning
- Replies: 17
- Views: 15663
Re: Northstar 7165 OBD1 Bin creation and tuning
How have your been adjusting the calibration for years without logging anything? Rightly or wrongly - yes. I have used the wideband on long steady hills in different gears and different loads to get the VE chart set. I usually do this with the laptop on the passenger seat. Other adjustments i have ...
- Wed May 31, 2017 9:48 pm
- Forum: Custom Code
- Topic: Northstar 7165 OBD1 Bin creation and tuning
- Replies: 17
- Views: 15663
Re: Northstar 7165 OBD1 Bin creation and tuning
Sorry I thought you were considering running a '165, not already on it. It sounds like you have a wideband connected. Can you post a log of something like a 10 minute drive, better if it has stalled or almost stalled on decel? Yes I have the whole setup and I'm happy with how it works. I willpost a...
- Tue May 30, 2017 12:31 pm
- Forum: Custom Code
- Topic: Northstar 7165 OBD1 Bin creation and tuning
- Replies: 17
- Views: 15663
Re: Northstar 7165 OBD1 Bin creation and tuning
What sort of issues do you have with how it runs It actually runs well, but its not like a stock tune so it has some quirks. First, Antus- I did do the math for the injectors and they are set up well. I forget how I connected to the Northstar crank sensors (there are two) but I did use them, and I ...
- Mon May 29, 2017 11:39 am
- Forum: Custom Code
- Topic: Northstar 7165 OBD1 Bin creation and tuning
- Replies: 17
- Views: 15663
Re: Northstar 7165 OBD1 Bin creation and tuning
I was afraid of that - the Northstar is a nice engine, but a bit of an albatross - not much else like it. I guess the 12P I started with was also meant for pushrod V8 - its what was with the OSE12P setup from the start. How much different would variables pertaining to defco, a/c intergration, knock ...
- Sun May 28, 2017 1:39 pm
- Forum: Custom Code
- Topic: Northstar 7165 OBD1 Bin creation and tuning
- Replies: 17
- Views: 15663
Re: Northstar 7165 OBD1 Bin creation and tuning
OSE12P V111 - 1,2 and 3 bar.xdf Programming Charts for 1227165 PCM.xlsx ORIGINAL CADDI DATA.docx The original file I worked from is not a BIN. I worked from a text file of the Calibration Report I found for the engine. I copied it to a MS Word file, attached. The XDF File I use is also attached. Th...
- Sun May 28, 2017 12:11 pm
- Forum: Custom Code
- Topic: Northstar 7165 OBD1 Bin creation and tuning
- Replies: 17
- Views: 15663
Re: Northstar 7165 OBD1 Bin creation and tuning
Here's my Bin. The engine runs well on it, but it's not perfect. Caddi Northstar OSE12P.bin EDIT: updated the BIN. The prior one had the incorrect WBO2 sensor voltage thresholds. Thanks for having a look. Perhaps one of the stock bins listed by Delcowizzid on https://pcmhacking.net/forums/viewtopic....
- Sun May 28, 2017 3:12 am
- Forum: Custom Code
- Topic: Northstar 7165 OBD1 Bin creation and tuning
- Replies: 17
- Views: 15663
Northstar 7165 OBD1 Bin creation and tuning
Topic: Using an OBD1 7165 with OSE12P to run an OBD2 Northstar engine. The car is a 1988 Pontiac Fiero, 5 spd transmission. Resource: Parameter File Printout (in text format) from a stock Northstar OBD2 PCM Problem: How to make an OBD1 BIN for the 7165 from the OBD2 text file data Solution: I copied...
- Sat May 27, 2017 11:57 pm
- Forum: US ALDL ECUs
- Topic: Need assistance - Northstar PCMs
- Replies: 3
- Views: 4536
Re: Need assistance - Northstar PCMs
Further to my last post..
Am I the only one running a 7165 and OSE12P on a Northstar?
Every so often I do a search for others for additional info or ideas and get no response.
Anyone else doing this?
Cheers.
Am I the only one running a 7165 and OSE12P on a Northstar?
Every so often I do a search for others for additional info or ideas and get no response.
Anyone else doing this?
Cheers.
- Sat May 27, 2017 11:51 pm
- Forum: US ALDL ECUs
- Topic: Need assistance - Northstar PCMs
- Replies: 3
- Views: 4536
Re: Need assistance - Northstar PCMs
I run a Vin Y N* in my Fiero. I use a 7165 ECM with OSE12P for engine only operation - I have a 5 spd. It runs well, still have minor issues with some aspects of the tune, mostly around idle and integration of A/C, cooling fan etc. Major tuning of the fuel map is quite easy with the WB O2 sensor. Ha...
- Sat Sep 13, 2014 1:07 pm
- Forum: Hardware Modification and Development
- Topic: Convert V6 Netres To V8
- Replies: 124
- Views: 150584
Re: Convert V6 Netres To V8
Picked up a new 305 ESC unit today. I'll see how well it works on the Northstar.....festy wrote:
That would make the knock frequencies around 6.14kHz and 6.10kHz - should be close enough to give decent results.
Thanks guys!