Search found 206 matches
- Tue Mar 05, 2024 12:00 pm
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: New XDFs for 12202088 Series_2 and 12225074
- Replies: 1
- Views: 1763
New XDFs for 12202088 Series_2 and 12225074
I've had the need for an XDF for a 12202088 Series_2 OS and found that the only "mostly complete" one was written for the US tunes, being that the units in a lot of entries were written with units based on Deg F or Ft Lbs torque, plus some math calcs were close, not exact, so a couple of m...
- Thu Jan 04, 2024 11:46 am
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: Tuner pro "Error-One or more checksums could not be updated"
- Replies: 13
- Views: 7990
Re: Tuner pro "Error-One or more checksums could not be upda
The box in red saves the plugins UUID in to the XDF. So for this checksum to work the matching dll much be available on the system when it loads the XDF. Because you cant see the UUID easily in the XDF or in the DLL it gets hard if your not supplied the XDF with the DLL at the same time, or you don...
- Fri Aug 04, 2023 1:10 pm
- Forum: Realtime Delco Tuning
- Topic: REALTIME VX-VY n/a PCM
- Replies: 55
- Views: 66103
Re: REALTIME VX-VY n/a PCM
To back what Antus posted earlier about the length of ribbon, some years ago I made a bios chip flashing adaptor using floppy cable as the connecting cable, anything greater than 6 inches in length resulted in programming errors, just a thought on my own experience using floppy ribbon. MyProg1.JPG
- Fri Jul 28, 2023 1:14 pm
- Forum: Realtime Delco Tuning
- Topic: REALTIME VX-VY n/a PCM
- Replies: 55
- Views: 66103
Re: REALTIME VX-VY n/a PCM
The seller from the ebay sale I posted above has half of what you're looking for.VX L67 Getrag wrote:It would be so much easier if I could find where to buy this…
- Fri Jul 28, 2023 9:43 am
- Forum: Realtime Delco Tuning
- Topic: REALTIME VX-VY n/a PCM
- Replies: 55
- Views: 66103
Re: REALTIME VX-VY n/a PCM
That was my thought when I saw the ribbon soldered to the board.The1 wrote:Yeh I'd just mount it on a memcal to burner adapter
You can find them on Ebay listed as PLCC emulator adapter.
Soldering a plcc chip mount to the board is probably a stronger long term solution.
- Fri Jun 30, 2023 9:34 am
- Forum: Tunerpro
- Topic: Is TunerPro rt registration a scam
- Replies: 8
- Views: 3754
Re: Is TunerPro rt registration a scam
Yeah definitely not a scam, and as antus stated, definitely the right email.
I emailed him a couple of days after I paid the fee as I didn't get the key, figured he was busy and waited, turns out he was.
He's an honest hard worker with limited spare time.
I emailed him a couple of days after I paid the fee as I didn't get the key, figured he was busy and waited, turns out he was.
He's an honest hard worker with limited spare time.
- Mon Nov 21, 2022 5:51 pm
- Forum: Chip/Memcal Reading/Writing
- Topic: wellon vp598 programmer 27c010 Ecotech eeprom
- Replies: 2
- Views: 3910
Re: wellon vp598 programmer 27c010 Ecotech eeprom
The BZPT0725 chip I have here for a getrag VS uses the National NM27C010 chip, not sure about others.
- Thu Oct 20, 2022 9:13 am
- Forum: Holden ALDL ECUs
- Topic: NVRAM Issues
- Replies: 18
- Views: 5266
Re: NVRAM Issues
what file did you put on the nvram? was it the stacked file? thats the one you need to use as the nvram is 128 kbyte, and the memcal max is 64kbyte, so you need a copy in each bank else only one bank will be working (probably not the one you have selected with the map_sw jumper). Was posting the sa...
- Fri Oct 07, 2022 8:33 pm
- Forum: GM LS1 512Kbyte and 1Mbyte and newer
- Topic: RTLS1 with LS1 Boost OS
- Replies: 22
- Views: 12889
Re: RTLS1 with LS1 Boost OS
Thanks, not sure why that was set in the board preferences, just changed it now.
- Tue May 10, 2022 12:56 pm
- Forum: General Tuning Discussion
- Topic: End of Injection - L67/ecotec
- Replies: 16
- Views: 6955
Re: End of Injection - L67/ecotec
Mixed results. I took 40° off the cold table to 2000rpm. First morning the car was really flat and it almost stalled. 2nd morning I leaned out the cold start and it improved somewhat but I could swear it rattled as the engine returned to idle after a short drive. Going to lean out the cold start a ...