Hey everyone. Have converted my vt s1 5l Calais to s2 gen3 manual, Everything is up and running and works, Except the ecm com wire is isn’t in the obd plug, being a s1 They didn’t have the yellow wire. Behind the strut tower in the engine wiring plugs the terminal I need Has a white/blue wire in it,...

Hi everyone. I have a turbo 304 in a statesman, have sorted most of the tune but now I have a couple Of lean areas that I can’t find the tables to correct them. But they have only come around since sorting out the VE tables. First one is cold start it runs mid 12’s for about 2 mins and then leans of...

Good call guys, just tested it and it was the lead.
Only differed is the length, the one that is newer
Is about 2m long mine is half the length.
Thanx for the help never thought to change that
As it was new.

I have a spare I shall swap it out, thanx

Hey ppl, Tuning an 808 in a gq off road truck, it's a stroked 5L, Can connect and upload change etc when it's sitting there, Can data trace when it starts for about 30 seconds and then The data connection drops and cannot do anything further. Have to unplug and shut RT Tuner and re open again For it...

Thanx Antus,
I believe I have just pulled the info needed from the Siemens website,
Will look into all this one night soon I hope.
I never set the injector opening pages so will start there and progress through.

Thanx VL, once I get it back together i shall change all that
Before starting it.

Hello everyone, The VQ has been alive for a bit and tuning has been good fun, But the blue top injectors maxed out quickly as suspected but that was the Budget at the time. Now have 60 lb Siemens fitted, so an increase of just over 50%. Am I correct in thinking once I change the kinjiflow numbers An...

Hey everyone.
Noid light was more tell tale than multi meter, injectors are full powered.
Found the injector harness on left hand side rubbed through
On the lifting bracket.
Will repair it soon, hopefully all good after that.

Thanx delco, I have him on the Job of borrowing some injectors.
Ill leave my ecu in untill its confirmed either way.